Allgemeine Werkstoffeigenschaften
Werkstoffwissenschaften  —  Technische Fakultät  —  Friedrich-Alexander Universität  —  UnivIS  —  Wiki
Bitte aus technischen Gründen nur drei Artikel pro Bestellung!

2019/8, J. Ast, M. Ghidelli, K. Durst, M. Göken, M. Sebastiani, A.M. Korsunsky, A review of experimental approaches to fracture toughness evaluation at the micro-scale. In: Materials and Design 173 (2019) , 2019,
2019/7, X. Hou, S. Krauß, B. Merle, Additional grain boundary strengthening in length-scale architectured copper with ultrafine and coarse domains. In: Scripta Materialia 165 (2019), 55-59, 2019,
2019/2, B. Merle, Creep behavior of gold thin films investigated by bulge testing at room and elevated temperature. In: Journal of Materials Research 34(1) (2019), 69-77, 2019,
2019/25, B. Merle, W.H. Higgins, G. M. Pharr, Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates. In: Journal of Materials Research 34 (2019), 3495-3503, 2019,
2019/24, E.I. Preiß, H. Lyu, J.P. Liebig, G. Richter, F. Gannott, P.A. Gruber, M. Göken, E. Bitzek, B. Merle, Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films. In: Journal of Materials Research 34 (2019), 3483-3494, 2019,
2019/16, M.Bykov, S. Chariton, H. Fei, T. Fedotenko, G. Aprilis, A. Ponomareva, F. Tasnadi, I. Abrikosov, B. Merle, P. Feldner, S. Vogel, W. Schnick, V. Prakapenka, E. Greenberg, M. Hanfland, A. Pakhomova, H.-P. Liermann, T. Katsura, N. Dubroviskaia, L. Dubrovisky, High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions. In: Nature Communications 10, 1 (2019), 2994, 2019,
2019/15, C.F. Böhm, P. Feldner, B. Merle, S.E.Wolf, Conical nanoindentation allows azimuthally independent hardness determination in geological biogenic minerals. In: Materials 12 (10) (2019), 1630, 2019,
2018/9, P. Feldner, B. Merle, M. Göken, Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures. In: Materials and Design 153 (2018), 71-79, 2018,
2018/6, B. Merle, X. Kaus, M. Tallawi, A.R. Boccaccini, M. Göken, Dynamic mechanical characterization of poly(glycerol sebacate)/poly(butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation. In: Materials Letters 221 (2018), 115-118, 2018,
2018/1, B. Merle, H.W. Höppel, Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement. In: Experimental Mechanics 58(3) (2018), 465-474, 2018,
2018/17, N.H. Khansur, U. Eckstein, L. Benker, U. Deisinger, B. Merle, K.G. Webber, Room temperature deposition of functional ceramic films on low-cost metal substrate. In: Ceramics International (2018), 2018,
2018/12, J.P. Liebig, S. Krauß, M. Göken, B. Merle, Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression. In: Acta Materialia 145 (2018), 247-254, 2018,
2017/9, E. I. Preiß, B. Merle, M. Göken, Understanding the extremely low fracture toughness of freestanding gold thin films by in-situ bulge testing in an AFM. In: Materials Science and Engineering A 691 (2017), 218-225, 2017,
2017/8, P. Feldner, B. Merle, M. Göken, Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation. In: Journal of Materials Research 32 (8) (2017), 1466-1473, 2017,
2017/7, C. Fischer, A. Seefried, B. Merle, M. Göken, D. Drummer, Influencing hardness and wear during the dynamic tempered microinjection molding process by considering isothermal holding time. In: Polymer Engineering and Science 57 (2) (2017), 121-128, 2017,
2017/28, B. Vierneusel, L. Benker, S. Tremmel, M. Göken, B. Merle, Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique. In: Thin Solid Films 638 (2017), 159-166, 2017,
2017/27, J. Ast, M. Göken, K. Durst, Size-dependent fracture toughness of tungsten. In: Acta Materialia 138 (2017), 198-211, 2017,
2017/26, M. Ghanem, M. Göken, B. Merle, Plane-strain bulge testing of thin films under compressive residual stresses. In: Surface and Coatings Technology 327 (2017), 167-173, 2017,
2017/25, F. Mikschl, B. Merle, M. Baum, J. Heberle, M. Göken, M. Schmidt, Micromechanical characterization of laser consolidated nanoparticle ITO layers. In: Thin Solid Films 642 (2017), 214-218, 2017,
2017/13, S. Shrestha, R. Fischer, G. J. Matt, P. Feldner, T. Michel, A. Osvet, I. Levchuk, B. Merle, S. Golkar, H. Chen, S. F. Tedde, O. Schmidt, R. Hock, M. Rührig, M. Göken, W. Heiss, G. Anton, C. J. Brabec, High performance direct X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. In: Nature Photonics 11 (2017), 436-440, 2017,
2017/11, B. Merle, V. Maier-Kiener, G.M. Pharr, Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation. In: Acta Materialia 134 (2017), 167-176, 2017,
2016/30, B. Merle, K.S. Nicholson, E.G. Herbert, M. Göken, An improved method for point deflection measurements on rectangular mem-branes. In: Materials & Design 109, (2016), 485-491, 2016,
2016/27, J.P. Liebig, M. Göken, G. Richter, M. Mackovi?, T. Przybilla, E. Spiecker, O.N. Pierron, B. Merle, A flexible method for the preparation of thin film samples for in situ TEM characterization combining shadow-FIB milling and electron-beam-assisted etching. In: Ultramicroscopy 171, (2016) 82-88, 2016,
2016/26, J. Ast, Benoit Merle, Karsten Durst, Mathias Göken, Fracture toughness evaluation of NiAl single crystals by microcantilevers – a new continuous J-integral method. In: Journal of Materials Research 31 (2016), 3786-3794, 2016,
2016/11, H. Javed, B. Merle, E. Preiß, R. Hivet, A. Benedetto, M. Göken, Mechanical characterization of metallic thin films by bulge and scratch testing. In: Surface & Coatings Technology 289 (2016) 69–74, 2016,
2015/9, H.U. Rehman, K. Durst, S. Neumeier, A.B. Parsa, A. Kostka, G. Eggeler, M. Göken,, Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy. In: Mater. Sci. Eng. A 634, (2015), 202-208, 2015,
2015/4, R. Webler, M. Ziener, S. Neumeier, P.J. Terberger, R. Vaßen, M. Göken, Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure. In: Mater. Sci. Eng. A 628, (2015), 374-381, 2015,
2015/21, B. Merle, D. Cassel, M. Göken, Time-dependent deformation behavior of freestanding and SiNx-supported gold thin films investigated by bulge tests. In: J. Mater. Res. 30, (2015), 2161-2169, 2015,
2015/20, V. Maier, C. Schunk, M. Göken, K. Durst, Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity. In: Phil. Mag. 95, (2015), 1766-1779, 2015,
2015/11, D. Li, T. Kunz, N. Wolf, J. P. Liebig, S. Wittmann, T. Ahmad, M. T. Hessmann, R. Auer, M. Göken, C. J. Brabec, Silicon nitride and intrinsic amorphous silicon double antireflection coatings for thin-film solar cells on foreign substrates. In: Thin Solid Films 583, (2015), 25-33, 2015,
2014/3, T. Marr, J. Freudenberger , V. Maier, H.W. Höppel, M. Göken, L. Schultz, The strengthening effect of phase boundaries in a severely plastically deformed Ti - Al composite wire. In: Metals 4, (2014), 37-54, 2014,
2014/2, B. Merle, M. Göken, Bulge fatigue testing of freestanding and supported gold films. In: J. Mater. Res. 29, (2014), 267-276, 2014,
2014/20, J. Ast, T. Przybilla, V. Maier, K. Durst, M. Göken, Microcantilever bending experiments in NiAl. In: J. Mater. Res. 29, (2014), 2129-2140, 2014,
2014/14, R. Webler, S. Neumeier, M. Göken, Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods. In: Pract. Metallogr. 51, (2014),8, 2014,
2014/12, B. Merle, V. Maier, K. Durst, Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation. In: Scanning Vol. 36, (2014), 526-529, 2014,
2013/9, J. Ast, K. Durst, Nanoforming behaviour and microstructural evolution during nanoimprinting of ultrafine-grained and nanocrystalline metals. In: Mater. Sci. Eng. A568 (2013) 68-75., 2013
2013/3, J.L. Hay, V. Maier, K. Durst, M. Göken, Strain rate sensitivity (SRS) of Nickel by Instrumented Indentation. In: Conference Proceedings of the Society for Experimental Mechanics Series 6 (2013), 47-52., 2013
2013/2, M. Krottenthaler, C. Schmid, J. Schaufler, K. Durst, M. Göken, A simple method for residual stress measurement in thin films by means of focused ion beam milling and digital image correlation. In: Sur. Coat. Techn. 215 (2013), 247-252., 2013
2013/29, Ahmed F., Krottenthaler M., Schmid C., Assessment of stress relaxation experiments on diamond coatings analysed by digital image correlation and micro-Raman spectroscopy. In: Surface & Coatings Technology 273 (2013), 255-260, 2013,
2013/27, U. Depner-Miller, J. Ellermeier, H. Scheerer, M. Oechsner, K. Bobzin, N. Bagcivan, T. Brögelmann, R. Reiss, K. Durst, C. Schmid, Influence of application technology on the erosion resistance of DLC coatings. In: Sur. Coat. Techn. 237, (2013), 284-291, 2013
2013/1, C. Schmid, V. Maier, J. Schaufler, B. Butz, E. Spieker, M. Göken, K. Durst, Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy. In: Thin solid films 528 (2013), 263-268., 2013
2013/15, J.M. Wheeler, V. Maier, K. Durst, M. Göken, J. Michler, Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature. In: Mater. Sci. and Eng. A585, (2013), 108-113., 2013
2013/13, V. Maier, B. Merle, M. Göken, K. Durst, An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures. In: Journal of Materials Research 28, (2013), 1177-1188., 2013
2012/6, F. Iqbal, J. Ast, M. Göken, K. Durst, In-situ micro-cantilever tests to study fracture properties of NiAl single crystals. In: Acta Mater. 60 (2012), 1193-1200, 2012
2012/4, J. Schaufler, K. Durst, T. Haas, R. Nolte, H.W. Höppel, M. Göken, The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens. In: J. Fatigue 37 (2012), 1-7, 2012
2012/3, B. Merle, V. Maier, M. Göken, and K. Durst, Experimental determination of the effective indenter shape and epsilon-factor for nanoindentation by continuously measuring the unloading stiffness. In: J Mater. Res. 27 (2012), 214-221, 2012
2012/38, H. Hetzner, J. Schaufler, S. Tremmel, K. Durst, S. Wartzack, Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests. In: Sur. Coat. Techn. 212 (2012), 46-54, 2012
2012/36, R. Webler, M. Krottenthaler, S. Neumeier, K. Durst, M. Göken, Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests. In: Superalloys 2012, TMS, (2012), 93-102, 2012
2012/33, S. Korte, W.J. Clegg, Studying plasticity in hard and soft Nb-Co Intermetallics. In: Adv. Eng. Mater. 14 (2012), 991-997, 2012
2012/2, S. Korte, R.J. Stearn, J.M. Wheeler, W.J. Clegg, High temperature microcompression and nanoindentation in vacuum. In: J Mater. Res. 27 (2012), 167-176, 2012
2012/28, J. Schaufler, C. Schmid, K. Durst, M. Göken, Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending. In: Thin Solid Films 522 (2012),480-484, 2012
2012/27, B. Merle, E.W. Schweitzer, M. Göken, Thickness and grain size dependence of the strength of copper thin films as investigated with bulge tests and nanoindentation. In: Phil. Mag. 92 (2012), 3172-3187, 2012
2012/25, H. ur Rehman, F. Ahmed, C. Schmid, J. Schaufler, K. Durst, Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling. In: Sur. Coat. Techn. 207 (2012), 163-169, 2012
2012/24, H. Hetzner, J. Schaufler, S. Tremmel, K. Durst, S. Wartzack, Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests. In: Sur. Coat. Techn. 206 (2012), 4864-4871, 2012
2012/23, R. Meszaros, B. Merle, M. Wild, K. Durst, M. Göken, L. Wondraczek, Effect of the thermal annealing on the mechanical properties of low-emissivity physical vapor deposition multilayer-coatings for architectural applications. In: Thin Solid Films 520 (2012), 7130-7135, 2012
2012/1, P.R. Howie, S. Korte, W.J. Clegg, Fracture modes in micropillar compression of brittle crystals. In: J Mater. Res. 27 (2012), 141-151, 2012
2012/13, K. Durst, H. ur Rehman, B. Merle, Comment to paper „Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements“ by J.M. Meza et al. [J. Mater. Res. 23(3), 725 (2008)]. In: J. Mater. Res. 27 (2012), 1205-1207, 2012
2012/12, H. Hetzner, J. Schaufler, G. Pejic, S. Tremml, K. Durst, S. Wartzack, Investigation on the tribological-mechanical behavior of amorphous carbon coatings by load-scanning tests. In: Materialwissenschaft und Werkstofftechnik 43 (2012), 226-233, 2012
2011/8, B. Merle, M. Göken, Fracture toughness of silicon nitride films of different thicknesses as measured by bulge tests. In: Acta Mater. 59 (2011), 1772, 2011,
2011/7, L. Zirkel, V. Maier, K. Durst, H. Münstedt, Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation. In: Polymer Testing 30 (2011), 286, 2011,
2011/45, J. Hay, V. Maier, K. Durst, M. Göken, Strain-rate Sensitivity (SRS) of Nickel by Instrumented Indentation. In: Agilent Technologies, Applications Note 5990-9434EN (2011), 2011
2011/42, S. Korte, M. Ritter, C. Jiao, P.A. Midgley, W.J. Clegg, Three-dimensional electron backscattered diffraction analysis of deformation in MgO micropillars. In: Acta Mater. 59 (2011), 7241, 2011,
2011/41, S. Korte, J.S. Barnard, R.J. Stearn, W.J. Clegg, Deformation of silicon - Insights from microcompression testing at 25-500°C. In: I. J. Plasticity 27 (2011), 1853, 2011,
2011/31, M. Funk, K. Ma, C. Eberl, M. Göken, K. Hemker, High-Temperature Mechanical Behavior of End-of-Life Cryomilled NiCrAlY Bond Coat Materials. In: Metal. Mater. Trans. A 42A (2011), 2233, 2011,
2011/28, F. Ahmed, K. Bayerlein, S.M. Rosiwal, M. Göken, K. Durst, Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling. In: Acta mater. 59 (2011), 5433, 2011,
2011/25, V. Maier, K. Durst, J. Mueller, B. Backes, H.W. Höppel, M. Göken, Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al. In: J. Mater. Res. 26 (2011), 1421, 2011,
2011/24, M. Lodes, A. Hartmaier, M. Göken, K. Durst, Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations. In: Acta Mater. 59 (2011), 4264, 2011,
2011/15, N.M. Jennet, M. Göken, K. Durst, Nano-mechanical testing in materials research and development FOREWORD. In: Phil. Mag. 91 (2011), 1035, 2011,
2011/12, J. Schaufler, G. Yang, K. Durst, E. Spiecker, M. Göken, Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems. In: Sur. Coat. Techn. 205 (2011), 3429, 2011,
2011/11, C. Pfeiffer, E. Affeldt, M. Göken, Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings. In: Sur. Coat. Techn. 205 (2011), 3245, 2011,
2010/28, B. Brandt, K. Durst, R. Belli, M. Göken, U. Lohbauer, Fracture toughness of GIC- A mechanistic approach on the nanoscale. In: Dental Mater. 26 (2010), e32, 2010,
2010/27, B. Brandt, U. Lohbauer, M. Göken, K. Durst, The influence of the particle size on the mechanical properties of dental glass ionomer cements. In: Adv. Eng. Mater. 12 (2010), B684, 2010,
2010/21, K. Durst, S. Hofmann, B. Backes, J. Mueller, M. Göken, Microimprinting of nanocrystalline metals - Influence of microstructure and work hardning. In: J. Mater. Proc. Tech. 210 (2010), 1787, 2010,
2010/20, B. Brandt, C. Zollfrank, O. Franke, J. Fromm, M. Göken, K. Durst, Micromechanics and ultrastructure of pyrolysed softwood cell walls. In: Acta Biomater. 6 (2010), 4345, 2010,
2010/14, V. Maier, H.W. Höppel, M. Göken, Nanomechanical behaviour of Al-Ti layered composites produced by accumulative roll bonding. In: J. Phys.: Conference Series 240 (2010), 012108, 2010,
2010/12, E. Nikulina, K. Durst, M. Göken, R. Völkl, U. Glatzl, Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission eletron microscopy and nanoindentation. In: I. J. Mater. Res. 101 (2010), 585-588, 2010,
2009/7, A. Böhner, R. Janisch, A. Hartmaier, Ab initio investigation of diamond coatings on steel. In: Scripta Mater. 60 (2009), 504-507, 2009,
2009/5, B. Backes, K. Durst, D. Amberger, M. Göken, Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy. In: Metal. Mater. Trans. A40 (2009), 257-261, 2009,
2009/4, J. Schaufler, K. Durst, O. Massler, M.Göken, In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading. In: Thin Solid Films 517 (2009), 1681-1685, 2009,
2009/33, P. Sadrabadi, K. Durst, M. Göken, W. Blum, Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits. In: Phil. Mag. Letters 89 (2009), 391-398, 2009,
2009/31, P. Armstrong, C. Knieke, M. Mackovic, G. Frank, A. Hartmaier, M. Göken, W. Peukert, Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process. In: Acta Mater. 57 (2009), 3060-3071, 2009,
2009/28, J. Das, S. Pauly, M. Boström, K. Durst, M. Göken, J. Eckert, Designing bulk metallic glass and glass matrix composites in martensitic alloys. In: J Alloys Comp. 483 (2009), 97-101, 2009,
2009/27, S. Gebhard, F. Pyczak, M. Göken, Microstructural and micromechanical characterization of TiAl alloys using atomic force microscopy and nanoindentation. In: Mater. Sci. Eng. A 523 (2009), 235-241, 2009,
2009/26, F. Ahmed, K. Durst, S. Rosiwal, J. Fandray, J, Schaufler, M. Göken, In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy. In: Surface and Coating Technology 204 (2009), 1022-1025, 2009,
2009/14, P. Sadrabadi, K. Durst, M. Göken, Study on the indentation size effect in CaF2: Dislocation structure and hardness. In: Acta Mater. 57 (2009) 1281-1289, 2009,
2009/13, D. Kiener, K. Durst, M. Rester, A. Minor, Revealing deformation mechanism with nanoindentation. In: JOM 61 (2009), 14-23, 2009
2009/12, B. Backes, Y.Y. Huang, M. Göken, K. Durst, The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory. In: J Mater. Res. 24 (2009), 1197-1207, 2009,
2009/11, O. Franke, K. Durst, M. Göken, Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples. In: , 2009,
2008/7, K. Durst, M. Göken, G.M. Pharr, Indentation size effect in spherical and conical indentation. In: J. Phys. D: Appl. Phys. 41 (2008), 074005, 2008,
2008/5, K. Gelse, O. Franke, J. Park, C. Mühle, M. Jehle, K. Durst, M. Göken, F. Hennig, K. v. d. Mark, H. Schneider, Cell-based resurfacing of large cartilage defects: long-term evaluation of grafts from autologous transgene-activated periosteal cells. In: Arthritis & Rheumatism 58 (2008), 475–488, 2008,
2008/37, S. Neumeier, F. Pyczak, M. Göken, The influence of ruthenium and rhenium on the local properties of the gamma- and gamma?-phase in nickel-base superalloys and their consequences for alloy behaviour. In: Proceedings of the International Symposium on Superalloys 2009, 109-119, 2008
2008/34, S. Ndlovou, K. Durst, H.W. Höppel, M. Göken, Study on the local damage mechanisms in WC-Co hard metals during scratch testing. In: Materials Research Society Symposium Proceedings 1049, (2008), 75-81, 2008
2008/20, O.Franke, M. Göken, A. M. Hodge, The Nanoindentation of Soft Tissue: Current and Developing Approaches. In: JOM, 6 (2008), 49-53, 2008
2007/9, D. Dzivenko, A. Zerr, E. Schweitzer. M. Göken, R. Boehler, R. Riede, Elastic moduli and hardness of c-Zr2.86(N 0.88 O 0.12) having Th3P4-type structure. In: Appl. Physics Lett. 90, (2007) 191910, 2007,
2007/5, O. Franke, K. Durst, V. Maier, M. Göken, T. Birkenholz, K. Gelse, Nanomechanical properties of hyaline and repair cartilage. In: Acta Biomaterialia 3, (2007) 873-881, 2007,
2007/3, S. Ndlovu, K. Durst, M. Göken, Investigation of the wear properties of WC-Co hard metals using nanoscratch testing. In: Wear 263, (2007) 1602 - 1609, 2007,
2007/2, P. Wellmann, P. Hens, S.A. Sakwe, D. Queren, R. Müller, K. Durst, M. Göken, Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth. In: Mater.Sci.Forum 556-557, (2007) 259-262, 2007,
2007/19, O. Franke, K. Durst, M. Göken, Microstructure and local mechanical properties of Pt modified Nickelaluminides on nickel-base superalloys after thermo-mechanical fatigue. In: Mat. Sci. Eng. A 467 (2007), 15-23, 2007,
2007/18, K. Durst, O. Franke, A. Böhner, M. Göken, Indentation size effect in NiFe solid solutions. In: Acta Mater. 55 (2007) 6825 – 6833, 2007,
2007/17, E. W. Schweitzer, M. Göken, In situ bulge testing in an atomic force microscope: Microdeformation experiments of thin film membranes. In: J. Mater. Res. 22, (2007) 2902 - 2911, 2007,
2006/2, K. Durst, B. Backes, O. Franke, M. Göken, Indentation size effect in metallic materials: Modelling strength from pop-in to macroscopic hardness using geometrically necessary dislocations. In: Acta mater. 54 (2006), 2547-2555, 2006,
2006/22, J. Mueller, K. Durst, D. Amberger, M. Göken, Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations. In: Materials Science Forum Vols. 503-504 (2006), 31-36, 2006,
2006/20, M. Dinkel, F. Pyczak, M. Goeken, P. Heinz, A. Volek, R. F. Singer, M. Ott, E. Affeldt, A. Vossberg, Nanoindentation and Orientation Measurements in Single Crystalline Brazing Joints of Nickelbase Superalloys. In: Materials for Advanced Power Engineering, Proceedings of the 8th Liege Conference, J. Lecomte-Beckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part II, (2006), 633–642, 2006
2006/16, B. Backes, K. Durst, M. Göken, Determination of plastic properties of polycrystalline metallic materials by nanoindentation: experiments and finite element simulations. In: Phil. Mag. A 86 (2006), 5541-5551, 2006,
2005/5, F. Pyczak, B. Devrient, H. Mughrabi, The effects of different alloying elements on the thermal expansion coefficients, lattice constants and misfit of nickel-based superalloys investigated by X-ray diffraction. In: "TMS, Superalloy 2004, 2005, 827-836"
2005/4, R. Bürgel, J. Grossmann, O. Lüsebrink, H. Mughrabi, F. Pyczak, R.F. Singer, A. Volek, Development of a new alloy for directional solidification of large industrial gas turbine blades. In: "TMS, Superalloy 2004, 2005, 25-34"
2005/3, K. Durst, B. Backes, M. Göken, Determination of plastic properties of polycrystalline metallic materials by nanoindentation – Experiments and finite element simulation. In: Mater. Res. Soc. Symp. Proc. Vol. 841, 2005, R11.4.1-R11.4.6, 2005
2005/2, K. Durst, B. Backes, M. Göken, Indentation size effect in metallic materials: Correcting for the size of the plastic zone. In: Scripta Mater. 52 (2005) 1093-1097, 2005,
2005/16, B. Wolf, M Göken, On the pressure dependence of the indentation modulus. In: On the pressure dependence of the indentation modulus, 2005
2005/13, "W. Blum, Y.J. Li. In: H. Zeng, 2005, P. Zhang
2004/8, E. Schweitzer, M. Göken, The grain boundary hardness in austenitic stainless steels studied by nanoindentations. In: Z. Metallkd. 95 (2004), 492-498, 2004
2004/7, K. Durst, M. Göken, Nanoindentierung – Eine Sonde für die lokalen mechanischen Eigenschaften. In: Prakt. Met. Sonderband 36, M. Pohl (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, 319-328, 2004
2004/6, K. Durst, O. Franke, H.W. Höppel, Ernst E. Affeldt, M. Göken, Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis-Superlegierungen nach thermomechanischer Ermüdung. In: Prakt. Met. Sonderband 36, M. Pohl (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, 117-122, 2004
2004/5, M. Göken, R. Magerle, M. Hund, K. Durst, Nanotomographie metallischer Gefüge. In: Prakt. Met. Sonderband 35, (P.D. Portella) (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, S. 257-262, 2004
2004/23, E. Schweitzer, K. Durst, D. Amberger, M. Göken, The Mechanical Properties in the Vicinity of grain boundaries in ultrafine-grained and Polycrystalline Materials Studied by Nanoindentations. In: Materials Research Society Symp. Prof. Vol 821 MRS, Warrendale, 2004, SP4.91-P4.9.6, 2004
2004/22, K. Durst, O. Franke, M. Göken, Nanoindentations as a local probe fort he mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings. In: Superalloys 2004, Edited by K.A Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, TMS (The Minerals, Metals & Materials Society) (2004) 467-476, 2004
2004/20, S. Ulrich, C. Ziebert, M. Stüber, E. Nold, H. Holleck, M. Göken, E. Schweitzer, P. Schloßmacher, Correlation between constitution, properties and machining performance of TiN/ZrN multilayers. In: Surface & Coatings Technology 188-189 (2004), 331-337, 2004,
2004/1, K. Durst, M. Göken, H. Vehoff, Finite element study for nanoindentation measurements on two-phase materials. In: J. Mater, Res. 19 (2004) 85-93, 2004
2004/16, K. Durst and M. Göken, Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys. In: Mat. Sci. Eng. A 387-389 (2004), 312-316, 2004,
2003/12, F. Grube, E.A. Affeldt, H. Mughrabi, Thermomechanical fatigue behaviour of an aluminde-coated monocrystalline Ni-base superalloy. In: Thermomechanical Fatigue Behaviour of Materials: Vol. 4, ASTM STP 1428, M.A. McGaw, S. Kalluri, J. Bressers and S.D. Peteves, (eds.), ASTM International, West Conshohocken, PA, pp. 164-179, 2003
2002/34, K. Durst, F. Pyczak, H. Biermann, M. Göken, H. Mughrabi, H. Vehoff, Microstructural and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigations. In: Proc. of Materialsweek 2002, Werkstoffwoche-Partnerschaft, Werkstoffinformationsgesellschaft (eds.), Frankfurt, 2002
2002/29, J. Zeschky, J.S.H. Lo, M. Scheffler, H.W. Höppel, M. Arnold and P. Greil, Finite element simulation of spherical indentation in the elastic – plastic transition. In: Z. Metallkd. 93 (2002) 857-861, 2002
2002/23, V. Pugsley, G. Korn, S. Luyckx and H.-G. Sockel , On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material. In: Z. Metallkd. 93 (2002) 745-749, 2002