Allgemeine Werkstoffeigenschaften
Werkstoffwissenschaften  —  Technische Fakultät  —  Friedrich-Alexander Universität  —  UnivIS  —  Wiki
High temperature materials
Bitte aus technischen Gründen nur drei Artikel pro Bestellung!

2020/4, A. Bezold, N. Volz, F. Xue, C.H. Zenk, S. Neumeier, M. Göken, On the precipitation-strengthening contribution of the Ta-containing Co3(Al,W)-phase to the creep properties of y/y' cobalt-base superalloys. In: Metallurgical and Materials Transactions A 51A (2020), 1567-1574, 2020, http://dx.doi.org/10.1007/s11661-020-05626-2
2020/3, D. Hausmann, C. Solis, L.P. Freund, N. Volz, A. Heinemann, M. Göken, R. Gilles, S. Neumeier, Enhancing the high-temperature strength of a Co-base superalloy by optimizing the y / y' microstructure. In: Metals 10 (2020), 321, 2020, http://dx.doi.org/10.3390/met10030321
2020/1, J. He, C.H.Zenk, X. Zhou, S. Neumeier, D. Raabe, B. Gault, S.K. Makineni, On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy. In: Acta Materialia 184 (2020), 86-99, 2020, http://dx.doi.org/10.1016/j.actamat.2019.11.035
2019/9, M. Weiser, M.C. Galetz, H.-E. Zschau, C. H. Zenk, S. Neumeier, M. Göken, S. Virtanen, Influence of Co to Ni ratio in y?-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C. In: Corrosion Science 156 (2019), 84-95, 2019, http://dx.doi.org/10.1016/j.corsci.2019.05.007
2019/4, M. Lenz, Y. M. Eggeler, J. Müller, C. H. Zenk, N. Volz, P. Wollgramm, G. Eggeler, S. Neumeier, M. Göken, E. Spiecker, Tension/Compression asymmetry of a creep deformed single crystal Co- base superalloy. In: Acta Materialia 166 (2019) 597-610, 2019, http://dx.doi.org/10.1016/j.actamat.2018.12.053
2019/28, S. Katnagallu, L.T. Stephenson, I. Mounton, C. Freysoldt, A.P.A. Subramanyam, J. Jenke, A.N.Ladines, S. Neumeier, T. Hammerschmidt, R. Drautz, J. Neugebauer, F. Vurpillot, D. Raabe, B. Gault, Imaging individual solute atoms at crystalline imperfections in metals. In: New Journal of Physics 21 (2019), 123010, 2019, http://dx.doi.org/10.1088/1367-2630/ab5cc4
2019/22, S. Giese, S. Neumeier, D. Amberger-Matschkal, J. Bergholz, R. Vaßen, M. Göken, Microtensile creep testing of freestandingMCrAlY bond coats. In: Journal of Materials Research 34 (2019), 2643-2652, 2019, http://dx.doi.org/10.1557/jmr.2019.169
2019/1, J.Bresler, S. Neumeier, M.Ziener, F.Pyczak, M.Göken, The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha2 titanium aluminides. In: Materials Science & Engineering A 744 (2019) 46-53, 2019, http://dx.doi.org/10.1016/j.msea.2018.11.152
2019/19, C. Zenk, J.S.K.L. Gibson, V. Maier-Kiener, S. Neumeier, M. Göken, S. Korte-Kerzel, Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements. In: Acta Materialia 181 (2019), 385-398, 2019, http://dx.doi.org/10.1016/j.actamat.2019.09.008
2019/18, D. Matschkal-Amberger, M. Kolb, S. Neumeier, S. Gao, A. Hartmaier, K. Durst, M. Göken, New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures. In: Materials and Design 183 (2019), 108090, 2019, http://dx.doi.org/10.1016/j.matdes.2019.108090
2019/17, S.Giese, F. Kern, C.A.Macauley, S. Neumeier, M. Göken, Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests. In: Journal of the European Ceramic Society 39, 13 (2019), 3830–3836, 2019, http://dx.doi.org/10.1016/j.jeurceramsoc.2019.05.006
2019/11, S. Giese, S. Neumeier, J. Bergholz, D. Naumenko, W. J. Quadakkers, R. Vaßen, M. Göken, Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests. In: Metals 9 (2019), 692, 2019, http://dx.doi.org/10.3390/met9060692
2018/8, L.P. Freund, A. Stark, A. Kirchmayer, N. Schell, F. Pyczak, M. Göken, S. Neumeier, The effect of a grain boundary pinning B2 phase on polycrystalline Co-based superalloys with reduced density. In: Met. Mat. Trans A (2018) 1-19, 2018, http://dx.doi.org/doi.org/10.1007/s11661-018-4757-2
2018/7, L.P. Freund, A. Stark, F. Pyczak, N. Schell, M. Göken, S. Neumeier, The grain boundary pinning effect of the u phase in an advanced polycrystalline y/y' Co-base superalloy. In: Journal of Alloys and Compounds 753 (2018), 333-342, 2018, http://dx.doi.org/10.1016/j.jallcom.2018.04.204
2018/4, M.Kolb, L.P. Freund, F. Fischer, I. Povstugar, S.K. Makineni, B. Gault, D. Raabe, J. Müller, E. Spiecker, S. Neumeier, M. Göken, On the grain boundary strengthening effect of boron in y/y' Cobaltbase superalloys. In: Acta Materialia 145 (2018), 247-254, 2018, http://dx.doi.org/10.1016/j.actamat.2017.12.020
2018/26, S. K. Makineni, M. Lenz, P. Kontis, P.J. Felfer, S. Neumeier, M. Herbig, E. Spieker, D. Raabe, B. Gault, Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys. In: JOM, 70 (2018), 1736-1743, 2018, http://dx.doi.org/10.1007/s11837-018-2802-7
2018/25, S. K. Makineni, M. Lenz, S. Neumeier, E. Spiecker, D. Raabe, B. Gault , Elemental segregation to antiphase boundaries in a crept CoNi-based single crystal superalloy. In: Scripta Materialia 157 (2018) 62-66 , 2018, http://dx.doi.org/10.1016/j.scriptamat.2018.07.042
2018/19, M.Cartón-Cordero, M. Campos, L.P. Freund, M. Kolb, S. Neumeier, M. Göken, J.M. Torralba, Microstructure and compression strength of Co-based superalloys hardened by y' and carbide precipiation. In: Materials Science & Engineering A 734 (2018), 437-444, 2018, http://dx.doi.org/10.1016/j.msea.2018.08.007
2018/18, A.-C.L. Kimmel, T.F. Malkowski, S. Griffiths, B. Hertweck, T.G. Steigerwald, L.P. Freund, S. Neumeier, M. Göken, J.S. Speck, E. Schluecker, High-temperature corrosion of Inconel®Alloy 718, Haynes®282®Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solution. In: Journal of Crystal Growth 498 (2018) 289–300, 2018, http://dx.doi.org/10.1016/j.jcrysgro.2018.06.018
2018/16, S.K. Makineni, M. Lenz, C.Zenk, S. Neumeier, E. Spieker, D. Raabe, On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy. In: Acta Materialia 155 (2018), 362-371, 2018, http://dx.doi.org/10.1016/j.actamat.2018.05.074
2018/14, N. Volz, C.H. Zenk, M.Lenz, S. Virtanen, E. Spieker, S. Neumeier, M. Göken, Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2018), 1-11, 2018, http://dx.doi.org/10.1007/s11661-018-4705-1
2017/4, F. Iqbal, F. Pyczak, S. Neumeier, M. Göken, Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy. In: Mat. Sci. Eng. A 689 (2017), 11-16, 2017, http://dx.doi.org/10.1016/j.msea.2017.02.017
2017/3, M. Zietara, S. Neumeier, M. Göken, A. Czyrska-Filemonowicz, Characterization of y and y' Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys. In: Met. Mater. Int. 23(1) (2017)126-131, 2017, http://dx.doi.org/10.1007/s12540-017-6109-y
2017/35, L.P. Freund, S. Giese, D. Schwimmer, H.W. Hoeppel, S. Neumeier, M. Göken, High temperature properties and fatigue strengtth of novel wroght gamma/gamma' Co-base superalloys. In: Journal of Materials Research 32 (24) (2017), 4475-4482, 2017, http://dx.doi.org/10.1557/jmr.2017.315
2017/31, M. Kolb, C.H. Zenk, A. Kirzinger, I. Povstugar, D. Raabe, S. Neumeier, M. Göken, Influence of rhenium on y?-strengthened cobalt-base superalloys. In: Journal of Materials Research 32(13) (2017), 2551-2559, 2017, http://dx.doi.org/10.1557/jmr.2017.242
2017/29, H. ur Rehman, K. Durst, S. Neumeier, A. Sato, R. Reed, M. Göken, On the temperature dependent strengthening of nickel by transition metal solutes. In: Acta Materialia 137 (2017), 54-63, 2017, http://dx.doi.org/10.1016/j.actamat.2017.05.038
2017/1, L. P. Freund, O.M.D.M. Messé, J. S. Barnard, M. Göken ,S. Neumeier, C. M.F. Rae, Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy. In: Acta Mat. 123 (2017) 295-304, 2017, http://dx.doi.org/10.1016/j.actamat.2016.10.048
2017/12, C.H. Zenk, I. Povstugar, R. Li, F. Rinaldi, S. Neumeier, D. Raabe, M. Göken, A novel type of Co–Ti–Cr-base y/y' superalloys with low mass density. In: Acta Materialia 135 (2017), 244-251, 2017, http://dx.doi.org/10.1016/j.actamat.2017.06.024
2016/6, Christopher H. Zenk, Alexander Bauer, Philip Goik, Steffen Neumeier, Howard J. Stone, Mathias Göken, Microstructure, Lattice Misfit, and High-Temperature Strength of y´-Strengthened Co-Al-W-Ge Model Superalloys. In: The Minerals, Metals & Materials Society and ASM International 2016, 2016, http://dx.doi.org/10.1007/s11661-016-3408-8
2016/4, S. Neumeier, H.U. Rehman, J. Neuner, C.H. Zenk, S. Michel, S. Schuwalow, J. Rogal, R. Drautz, M. Göken, Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo. In: Acta Mater. 106, (2016), 304 - 312, 2016, http://dx.doi.org/10.1016/j.actamat.2016.01.028
2016/23, M. Pröbstle, S.Neumeier, P. Feldner, R. Rettig, H.E. Helmer, R.F. Singer, M. Göken, Improved creep strength of nickel-base superalloys by optimized ?/?? partitioning behavior of solid solution strengthening elements. In: Materials Science & Engineering A676 (2016) 411–420, 2016, http://dx.doi.org/10.1016/j.msea.2016.08.121
2016/22, C.H. Zenk, S. Neumeier, M. Kolb, N. Volz, S.G. Fries, O. Dolotko, I. Povstugar, D. Raabe, M. Göken, The Role of Base Element in gamma' Strengthened Cobalt/Nickel Base Superalloys. In: TMS (The Minerals, Metals & Materials Society), 2016, 2016
2016/21, D. Huenert, M. Proebstle, A. Casanova, R. Schluetter, R. Krakow, M. Buescher, P. Randelzhofer, A. Evans, K. Loehnert, T. Witulski, S. Neumeier, C. Rae, ATI718PLUS® - New Nickel Based Disc Alloy and its Capability. In: TMS (The Minerals, Metals & Materials Society), 2016, 2016
2016/20, T. Hammerschmidt, J.Koßmann, C.H. Zenk, S. Neumeier, M. Göken, I. Lopez Galilea, L. Mujica Roncery, S. Huth, A.Kostka, W.Theisen and R. Drautz1, The Role of Local Chemical Composition for TCP Phase Precipitation in Ni-Base and Co-Base Superalloys. In: TMS (The Minerals, Metals & Materials Society), 2016, 2016
2016/1, C. Zenk, S. Neumeier, N. Engl, S. G. Fries, O. Dolotko, M. Weiser, S. Virtanen, M. Göken, Intermediate Co/Ni-base model superalloys — Thermophysical properties, creep and oxidation. In: Scripta Mater. 112, (2016), 83-86, 2016, http://dx.doi.org/10.1016/j.scriptamat.2015.09.018
2016/19, M. Pröbstle, S.Neumeier, J.Hopfenmüller, L.P.Freund, T.Niendorf, D.Schwarze, M. Göken, Superior creep strength of a nickel-based super alloy produced by selective laser melting. In: Materials Science & Engineering A674 (2016) 299–307, 2016, http://dx.doi.org/10.1016/j.msea.2016.07.061
2016/17, F. Brenne, A. Taube, M. Pröbstle, S. Neumeier, D. Schwarze, M. Schaper, T. Niendorf, Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting. In: Progress in Additive Manufacturing (Prog Addit Manuf) - Springer, 2016, http://dx.doi.org/10.1007/s40964-016-0013-8
2016/13, M. Kolb, J.M.Wheeler, H.N.Mathur, S.Neumeier, S.Korte-Kerzel, F. Pyczak, J. Michler, M.Göken, Local mechanical properties of the (?0+?0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures. In: Materials Science & Engineering A665(2016)135–140, 2016, http://dx.doi.org/10.1016/j.msea.2016.04.026
2015/9, H.U. Rehman, K. Durst, S. Neumeier, A.B. Parsa, A. Kostka, G. Eggeler, M. Göken,, Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy. In: Mater. Sci. Eng. A 634, (2015), 202-208, 2015, http://dx.doi.org/10.1016/j.msea.2015.03.045
2015/7, R. Rettig, N. Ritter, H.E. Helmer, S. Neumeier, R.F. Singer, Single-crystal nickel-based superalloys developed by numerical multi-criteria optimization techniques: design based on thermodynamic calculations and experimental validation. In: Modelling Simul. Mater. Sci. Eng. 23, (2015),24, 2015, http://dx.doi.org/10.1088/0965-0393/23/3/035004
2015/6, A. Bhowmik, S. Neumeier, S. Rhode, H. J. Stone, Allotropic transformation induced stacking faults and discontinuous coarsening in a gamma-gamma ' Co-base alloy. In: Intermetallics 59, (2015), 95-101, 2015, http://dx.doi.org/10.1016/j.intermet.2014.12.013
2015/4, R. Webler, M. Ziener, S. Neumeier, P.J. Terberger, R. Vaßen, M. Göken, Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure. In: Mater. Sci. Eng. A 628, (2015), 374-381, 2015, http://dx.doi.org/10.1016/j.msea.2015.01.060
2015/29, S. Neumeier, L. Freund, M. Göken, Novel wrought gamma/gamma ' cobalt base superalloys with high strength and improved oxidation resistance. In: Scripta Mater. 109, (2015), 104-107, 2015, http://dx.doi.org/10.1016/j.scriptamat.2015.07.030
2015/25, J. Koßmann, C. H. Zenk, I. Lopez-Galilea, S. Neumeier, A. Kostka, S. Huth, W. Theisen, M. Göken, R. Drautz, T. Hammerschmidt, Microsegregation and precipitates of an as-cast Co-based superalloy-microstructural characterization and phase stability modelling. In: J. Mater. Sci. 50, (2015), 6329-6338, 2015, http://dx.doi.org/10.1007/s10853-015-9177-8
2015/24, P. Terberger, D. Sebold, R. Webler, M. Ziener, S. Neumeier, L. Klein, S. Virtanen, M. Göken, R. Vaßen, Isothermal aging of a gamma '-strengthened Co-Al-W alloy coated with vacuum plasma-sprayed MCrAlY bond coats. In: Surf. Coat. Technol. 276, (2015), 360-367, 2015, http://dx.doi.org/10.1016/j.surfcoat.2015.06.048
2015/23, L. Freund, A. Bauer, L. Benker, S. Neumeier, M. Göken, Formation of Cuboidal Co3AlC Precipitates in Carbon-Containing Co-Al-W-Based Superalloys. In: Adv. Eng. Mater. 17, (2015), 1113-1118, 2015, http://dx.doi.org/10.1002/adem.201500171
2015/22, M. Göken, U. Glatzel, "DFG Research Training Group 1229 ""Stable and Metastable Multi-Phase Systems for Elevated Service Temperatures""". In: Adv. Eng. Mater. 17, (2015), 1096-1098, 2015, http://dx.doi.org/10.1002/adem.201500330
2015/14, A. Bauer, S. Neumeier, F. Pyczak, M. Göken, Influence of Iridium on the Properties of gamma '-Strengthened Co-Base Superalloys. In: Adv. Eng. Mater. 17, (2015), 748-754, 2015, http://dx.doi.org/10.1002/adem.201400266
2015/13, I. Lopez-Galilea, C. Zenk, S. Neumeier, S. Huth, W. Theisen, M. Göken, The Thermal Stability of Intermetallic Compounds in an As-Cast SX Co-Base Superalloy. In: Adv. Eng. Mater. 17, (2015), 741-747, 2015, http://dx.doi.org/10.1002/adem.201400249
2015/10, F. Pyczak, A. Bauer, M. Göken, U. Lorenz, S. Neumeier, M. Oehring, J. Paul, N. Schell, A. Schreyer, A. Stark, F. Symanzik, The effect of tungsten content on the properties of L1(2) -hardened Co-Al-W alloys. In: J. Alloy. Compd. 632, (2015), 110-115, 2015, http://dx.doi.org/10.1016/j.jallcom.2015.01.031
2014/26, M. Pröbstle, S. Neumeier, D. Hünert, M. Göken, Tensile and creep strength of thermally exposed allvac 718Plus. In: 8th International Symposium on Superalloy 718 and Derivatives, (2014), 349-360, 2014, http://dx.doi.org/10.1002/9781119016854.ch28
2014/25, A. Bhowmik, S. Neumeier, J.S. Barnard, C.H. Zenk, M. Göken, C.M.F. Rae, H.J. Stone, Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures. In: Philos. Mag. 94, (2014), 3914-3944, 2014, http://dx.doi.org/10.1080/14786435.2014.971086
2014/22, H. Mughrabi, The importance of sign and magnitude of y/y’ lattice misfit in superalloys – with special reference to the new y’-hardened cobalt-base superalloys. In: Acta Mater. 81, (2014), 21-29, 2014, http://dx.doi.org/10.1016/j.actamat.2014.08.005
2014/15, C.H. Zenk, S. Neumeier, H.J. Stone, M. Göken, Mechanical properties and lattice misfit of y/y' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system. In: Intermetallics 55, (2014), 28-39, 2014, http://dx.doi.org/10.1016/j.intermet.2014.07.006
2014/14, R. Webler, S. Neumeier, M. Göken, Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods. In: Pract. Metallogr. 51, (2014),8, 2014, http://dx.doi.org/10.3139/147.110310
2014/13, I. Povstugar, P.P. Choi, S. Neumeier, A. Bauer, C.H. Zenk, M. Göken, D. Raabe, Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys. In: Acta Mater. 78, (2014), 78-85, 2014, http://dx.doi.org/10.1016/j.actamat.2014.06.020
2013/8, F. Pyczak, A. Bauer, M. Göken, S. Neumeier, U. Lorenz, M. Oehring, N. Schella, A. Schreyer, A. Stark, F. Symanzik, Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy. In: Mater. Sci. and Eng. A571 (2013) 13-18., 2013
2012/7, M. Schloffer, F. Iqbal, H. Babrisch, E. Schwaighofer, F.-P. Schimansky, S. Mayer, A. Stark, T. Lippmann, M. Göken, F. Pyzcak, H. Clemens, Microstructure development and hardness of a powder metallurgical multi phase gamma-TiAl based alloy. In: Intermetallics 22 (2012), 231-240, 2012
2012/5, A. Heckl, S. Cenanovic, M. Göken, R.F. Singer, Discontinuous Precipitation and Phase Stability in Re- and Ru-Containing Nickel-Base Superalloys. In: Metal. Mater. Trans. A 43A (2012), 10-19, 2012
2012/37, A. Bauer, S. Neumeier, F. Pyczak, M. Göken, Creep Strength and Microstructure of Polycrystalline gamma-prime- Strengthened Cobalt-Base Superalloys. In: Superalloys 2012, TMS, (2012), 695-703, 2012
2012/36, R. Webler, M. Krottenthaler, S. Neumeier, K. Durst, M. Göken, Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests. In: Superalloys 2012, TMS, (2012), 93-102, 2012
2012/22, A. Bauer, S. Neumeier, F. Pyczak, R.F. Singer, M. Göken, Creep properties of different ?prime-strengthend Co-base superalloys. In: Mater. Sci. Eng. A 550 (2012), 333-341, 2012
2011/4, S. Neumeier, M. Dinkel, F. Pyczak, M. Göken, Nanoindentation and XRD investigation of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5. In: Mater. Sci. Eng. A 528 (2011), 815, 2011, http://dx.doi.org/10.1016/j.msea.2010.09.065
2011/46, S. Neumeier, F. Pyczak, M. Göken, Influence of rhenium and ruthenium on the local mechanical properties of the gamma and gamma’ phases in nickel-base superalloys. In: Phil. Mag. 91 (2011),4187, 2011, http://dx.doi.org/10.1080/14786435.2011.607139
2011/40, A. Bhowmik, H.T. Pang, S. Neumeier, H.J. Stone, I. Edmonds, Microstructure and oxidation resistance of Cr-Ta-Si alloys. In: Materials Research Society Symposium Proceedings 1295 (2011), 323, 2011, http://dx.doi.org/10.1557/opl.2011.38
2011/35, A. Heckel, S. Neumeier, S. Cenanovic, M. Göken, R.F. Singer, Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys. In: Acta Mater. 59 (2011), 6563, 2011, http://dx.doi.org/10.1016/j.actamat.2011.07.002
2011/31, M. Funk, K. Ma, C. Eberl, M. Göken, K. Hemker, High-Temperature Mechanical Behavior of End-of-Life Cryomilled NiCrAlY Bond Coat Materials. In: Metal. Mater. Trans. A 42A (2011), 2233, 2011, http://dx.doi.org/10.1007/s11661-011-0659-2
2011/30, J.P. Minshull, S. Neumeier, M.G. Tucker, H.J. Stone, A1-L12 structures in the Al-Co-Ni-Ti quaternary phase system. In: Adv. Eng. Res. 278 (2011), 399, 2011, http://dx.doi.org/10.4028/www.scientific.net/AMR.278.399
2011/29, S. Neumeier, J. Ang, R.A. Hobbs, C.M.F. Rae, H.J. Stone, Lattice misfit of high refractory ruthenium containing nickel-base superalloys. In: Adv. Mater. Res. 278 (2011), 60, 2011, http://dx.doi.org/10.4028/www.scientific.net/AMR.278.60
2011/20, L. Klein, A. Bauer, S. Neumeier, M. Göken, S. Virtanen, High temperature oxidation of gamma/gamma'-strengthened Co-base superalloys. In: Corrosion Science 53 (2011), 2027, 2011, http://dx.doi.org/10.1016/j.corsci.2011.02.033
2011/14, A. Heckl, S. Neumeier, M. Göken, R.F. Singer, The effect of Re and Ru on gamma/gamma? microstructure, gamma-solid solution strengthening and creep strength in nickel-base superalloys. In: Mater. Sci. Eng. A 528 (2011), 3435, 2011, http://dx.doi.org/10.1016/j.msea.2011.01.023
2010/25, F. Pyzcak, S. Neumeier, M. Göken, Temperature dependence of element partitioning in rhenium bearing nickel-base superalloys. In: Mater. Sci. Eng. A 527 (2010), 7939, 2010, http://dx.doi.org/10.1016/j.msea.2010.08.091
2010/24, A. Bauer, S. Neumeier, F. Pyczak, M. Göken, Microstructure and creep strength of different gamma/gamma'-strengthened Co-base superalloy variants. In: Scr. Mater. 63 (2010), 1197, 2010, http://dx.doi.org/10.1016/j.scriptamat.2010.08.036
2010/12, E. Nikulina, K. Durst, M. Göken, R. Völkl, U. Glatzl, Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission eletron microscopy and nanoindentation. In: I. J. Mater. Res. 101 (2010), 585-588, 2010, http://dx.doi.org/10.1016/1359-6462(96)00109-1
2010/11, A. Heckel, R. Rettig, S. Cenanovic, M. Göken, R.F. Singer, Investigation of the final stages of solidification and eutectic phase formation in Re and RU containing nickel-base superalloys. In: J. Crystal Growth 312 (2010), 2137, 2010, http://dx.doi.org/10.1016/j.jcrysgro.2010.03.041
2009/36, W. Blum, H. Chilukuru, Tertiary creep of tempered martensite 9-12% Cr-steels – On the microstructural orgin of creep life limitation. In: "Pressure vessels and piping, Volume II, materials and properties, 2009, http://dx.doi.org/ edited by: B. Raj, B.K. Choudhary, A. Kumar, Narosa Publishing House, New Dehli, 2009, 125-136"
2009/30, S. Reichstein, S. Kraft, H. Mughrabi, Sequence of distinct microyielding stages of monocrystalline nickel-base superalloy CMSX-6 at high temperatures. In: Int. J Mater. Res. 100 (2009), 494-499, 2009, http://dx.doi.org/Int. J Mater. Res. 100 (2009), 494-499
2009/27, S. Gebhard, F. Pyczak, M. Göken, Microstructural and micromechanical characterization of TiAl alloys using atomic force microscopy and nanoindentation. In: Mater. Sci. Eng. A 523 (2009), 235-241, 2009, http://dx.doi.org/10.1016/j.msea.2009.05.068
2009/23, F. Pyczak, S. Neumeier, M. Göken, Influence of lattice misfit on the internal stress and strain states before and after creep investigated in nickel-base superalloys containing rhenium and ruthenium. In: Mater. Sci. Eng. A 510-511 (2009), 295-300, 2009, http://dx.doi.org/10.1016/j.msea.2008.08.052
2009/16, R. Rettig, A. Heckel, S. Neumeier, F. Pyczak, M. Göken, R.F. Singer, Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys. In: Defect and Diffusion Forum 289-292 (2009), 101-108, 2009, http://dx.doi.org/10.4028/www.scientific.net/DDF.289-292
2009/10, H. Mughrabi, Microstructural aspects of high-temperature deformation of monocrystalline nickel-base superalloys: some open problems. In: Proc. of the Malcom McLean Memorial Symposium, edited by R.Reed and P. Lee, Special Issue of Mater. Sci. Technol. 25 (2009), 191-204, 2009, http://dx.doi.org/10.1179/174328408X361436
2008/3, R. Nützel, E.E. Affeldt, M. Göken, Damage Evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy. In: International Journal of Fatigue 30 (2008), 313-317, 2008, http://dx.doi.org/10.1016/j.ijfatigue.2007.01.045
2008/38, M.K. Dinkel, P. Heinz, F. Pyczak, A. Volek, M. Ott, E. Affelt, A. Vossberg, M. Göken, R.F. Singer, New boron and silicon free single crystal-diffusion brazing alloys. In: Proceedings of the International Symposium on Superalloys 2009, 211-220, 2008
2008/37, S. Neumeier, F. Pyczak, M. Göken, The influence of ruthenium and rhenium on the local properties of the gamma- and gamma?-phase in nickel-base superalloys and their consequences for alloy behaviour. In: Proceedings of the International Symposium on Superalloys 2009, 109-119, 2008
2008/29, R. Nützel, E.E. Affeldt, M. Göken, Influence of a beta-NiAl coating on monocrystalline nickel-base alloys on the thermo-mechanical fatigue life. In: 6th International Conference on Low Cycle Fatigue - LCF 6, Deutscher Verband für Materialforschung und -prüfung, Berlin, 2008, 449-454, 2008
2007/19, O. Franke, K. Durst, M. Göken, Microstructure and local mechanical properties of Pt modified Nickelaluminides on nickel-base superalloys after thermo-mechanical fatigue. In: Mat. Sci. Eng. A 467 (2007), 15-23, 2007, http://dx.doi.org/10.1016/j.msea.2007.02.069
2006/23, R. Agamennone, W. Blum, C. Gupta, J. K. Chakravartty, Evolution of microstructure and deformation resistance in creep of tempered martensitic 9-12%Cr-2%W-5%Co steels. In: Acta Mater. 54 (2006), 3003-3014, 2006, http://dx.doi.org/10.1016/j.actamat.2006.02.038
2006/21, Y. Wang, A. Scholz, C. Berger, K. H. Mayer, H. Chilukuru, K. Durst, W. Blum, Development of super heat resistant ferritic steels for environmental-friendly fossile-fired steam power plants with operating steam temperatures up to 650°C. In: Vortragsreihe VDEH, 2006, Düsseldorf, 2006
2006/20, M. Dinkel, F. Pyczak, M. Goeken, P. Heinz, A. Volek, R. F. Singer, M. Ott, E. Affeldt, A. Vossberg, Nanoindentation and Orientation Measurements in Single Crystalline Brazing Joints of Nickelbase Superalloys. In: Materials for Advanced Power Engineering, Proceedings of the 8th Liege Conference, J. Lecomte-Beckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part II, (2006), 633–642, 2006
2006/19, T. Seibert, K. Durst, H. Chilukuru, M. Göken, Quantitative microstructural analysis on the stability of MX and M2X in 9-12% Cr steels by AFM, SEM and TEM. In: Materials for Advanced Power Engineering, Proceedings of the 8th Liege Conference, J. Lecomte-Beckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part III, (2006), 1181-1190, 2006
2006/18, H. Chilukuru, K. Durst, M. Göken, W. Blum, On the roles of M2X and Z-phase in tempered martensitic 9-12% Cr steels. In: Materials for Advanced Power Engineering, Proceedings of the 8th Liege Conference, J. Lecomte-Beckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part III, (2006), 1241-1249, 2006
2005/1, A. Volek, F. Pyczak, R.F. Singer, H. Mughrabi, Partitioning of Re between gamma and gamma’ phase in nickel-base superalloys. In: Scripta Mater. 52 (2005) 141-145, 2005, http://dx.doi.org/10.1016/j.scriptamat.2004.09.013
2005/15, F. Pyczak, B. Devrient, F.C. Neuner, H. Mughrabi, The effect of alloying elements on the magnitude and temperature dependence of the gamma/gamma’ lattice mismatch of some selected rhenium-free and rhenium-containing nickel-base superalloys. In: Acta Materialia 53 (2005), 3879-3891, 2005
2005/13, "W. Blum, Y.J. Li. In: H. Zeng, 2005, http://dx.doi.org/ P. Zhang
2005/11, F. Pyczak, B. Devrient, F.C. Neuner, H. Mughrabi, The influence of different alloying elements on the development of the gamma/gamma’ microstructure of nickel-base superalloys during high-temperature annealing and deformation. In: Acta Materialia 53 (2005) 3879-3891, 2005, http://dx.doi.org/10.1016/j.actamat.2005.04.041
2004/6, K. Durst, O. Franke, H.W. Höppel, Ernst E. Affeldt, M. Göken, Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis-Superlegierungen nach thermomechanischer Ermüdung. In: Prakt. Met. Sonderband 36, M. Pohl (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, 117-122, 2004
2004/5, M. Göken, R. Magerle, M. Hund, K. Durst, Nanotomographie metallischer Gefüge. In: Prakt. Met. Sonderband 35, (P.D. Portella) (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, S. 257-262, 2004
2004/22, K. Durst, O. Franke, M. Göken, Nanoindentations as a local probe fort he mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings. In: Superalloys 2004, Edited by K.A Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, TMS (The Minerals, Metals & Materials Society) (2004) 467-476, 2004
2004/16, K. Durst and M. Göken, Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys. In: Mat. Sci. Eng. A 387-389 (2004), 312-316, 2004, http://dx.doi.org/10.1016/j.msea.2004.03.079
2004/12, F. Grube, E.E. Affeldt, H. Mughrabi, On the effect of platinum-modified aluminide coatings on a monocrystalline nickel base superalloy substrate under conditions of thermo-mechanical fatigue (TMF). In: 5th Int. Conf. on Low Cycle Fatigue, LCF, Berlin, P.D. Portella, H. Sehitoglu and K. Hatanaka (eds.), DVM Berlin, 46 (2004), 309-314, 2004
2003/8, H. Mughrabi, Microstructural aspects of cyclic deformation and fatigue of metals. In: "Thermomechanics, Microstructures and Plasticity, 2003, http://dx.doi.org/ Kluwer Academic Publishers, A. Finel et al. (eds.), 2003, pp. 205-214"
2003/4, S. Wöllmer, S. Zaefferer, M. Göken, Th. Mack, U. Glatzel, Characterization of phases of aluminized nickel base superalloys. In: Surface and Coatings Technology 167 (2003) 83-96, 2003, http://dx.doi.org/10.1016/S0257-8972(02)00843-5
2003/2, Y. Qin, G. Götz, W. Blum, Subgrain structure during annealing and creep of the cast martensitic Cr-steel G-X12CrMoWVNbN 10-1-1. In: Mat. Sci. Eng. A341 (2003) 211-215, 2003
2003/1, G. Götz, W. Blum, Influence of thermal history on precipitation of hardening phases in tempered martensite 10%Cr-steel X12CrMoWVNbN 10-1-1. In: Mat. Sci. Eng. A348 (2003) 201-207, 2003
2003/14, Y. Qin, G. Götz, W. Blum, Z.G. Zhu, Determination of size distribution of precipitates in the cast martensitic steel G-X12CrMoWVNbN 10-1-1 by direct and indirect method. In: J. of Alloys and Compounds 352 (2003) 260-264, 2003, http://dx.doi.org/10.1016/S0925-8388(02)01092-7
2003/12, F. Grube, E.A. Affeldt, H. Mughrabi, Thermomechanical fatigue behaviour of an aluminde-coated monocrystalline Ni-base superalloy. In: Thermomechanical Fatigue Behaviour of Materials: Vol. 4, ASTM STP 1428, M.A. McGaw, S. Kalluri, J. Bressers and S.D. Peteves, (eds.), ASTM International, West Conshohocken, PA, pp. 164-179, 2003
2003/11, F.C. Neuner, U. Tetzlaff, H. Mughrabi, Enhancement of thermomechanical fatigue resistance of a monocrystalline nickel-base superalloy by pre-rafting. In: Thermomechanical Fatigue Behaviour of Materials: Vol. 4, ASTM STP 1428, M.A. McGaw, S. Kalluri, J. Bressers and S.D. Peteves, (eds.), ASTM International, West Conshohocken, PA, pp. 112-126, 2003
2003/10, Z. Lu, F. Pyczak, S. Krämer, H. Biermann, H. Mughrabi, Fast and reliable evaluation of lattice distortions from convergent-beam electron diffraction patterns. In: Phil. Mag. 83 (2003) 2383-2397, 2003, http://dx.doi.org/10.1080/0141861031000109573
2002/9, Z. Lu, F. Pyczak, H. Biermann, H. Mughrabi, Measurement of local elastic strains in the single-crystal nickel-based superalloy CMSX-6 by convergent-beam electron diffraction. In: Phil. Mag. A 82 (2002) 1219-1234, 2002, http://dx.doi.org/10.1080/01418610110105650
2002/3, M. Kautz, H.W. Höppel, Z.M. Zhou, H. Mughrabi, "Fatigue lives and cyclic deformation behaviour of ultrafine grained materials. In: in: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe", 2002, http://dx.doi.org/2. DVM/DFG-Kolloquium Lebensdauervorhersage, Berlin, 2002, pp. 179-188
2002/34, K. Durst, F. Pyczak, H. Biermann, M. Göken, H. Mughrabi, H. Vehoff, Microstructural and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigations. In: Proc. of Materialsweek 2002, Werkstoffwoche-Partnerschaft, Werkstoffinformationsgesellschaft (eds.), Frankfurt, 2002
2002/32, V. Knezevic, G. Sauthoff, V. Bilk, G. Inden, A. Schneider, R. Agemennone, W. Blum, Y. Wang, A. Scholz, C. Berger, J. Ehlers, L. Singheiser, Martensitic/ferritic super heat-resistant 650°C steels – Design and testing of model alloys. In: ISIJ International 42 (2002) 1505-1514, 2002
2002/31, R. Agemennone, C. Berger, W. Blum, J. Ehlers, J. Granacher, G. Inden,V. Knuzevic, J. Quadakkers, G. Sauthoff, A. Scholz, L. Singheiser, J. Vilk and Y. Wang, Martensitic/ferritic super heat-resistant 650°C steels. In: Proc. Of the 7th Liege Conference Materials for Advanced Power Engineering J. Lecomte-Beckers, M. Carton, F. Schubert and P.J. Ennis (eds.) Vol. 3, 2002, 1279-1289, 2002
2002/30, R. Agamennone and W. Blum, Martensitic/ferritic super heat-resistant 650°C steels – microstructure. In: Proc. Of the 7th Liege Conference Materials for Advanced Power Engineering J. Lecomte-Beckers, M. Carton, F. Schubert and P.J. Ennis (eds.) Vol. 2, 2002, 1161-1171, 2002
2002/2, G. Eisenmeier, H.W. Höppel, H.-Z. Ding, H. Mughrabi, "Ermüdungslebensdauer der Magnesiumlegierung AZ 91: Experiment und Modellierung. In: in: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe", 2002, http://dx.doi.org/2. DVM/DFG-Kolloquium Lebensdauervorhersage, Berlin, 2002, pp.169-178
2002/1, H. Biermann, M. Riemer and H. Mughrabi , X-ray study of residual strains in lamellar PST-crystals of the intermetallic alloy TiAl after high-temperature compressive deformation. In: Proc. Int. Symp. TurbOMat, Advanced Thermal Barier Coatings and Titanium Aluminides for Gas Turbines, DRL, Bonn, 2002, pp. 116-120, 2002