Allgemeine Werkstoffeigenschaften
Werkstoffwissenschaften  —  Technische Fakultät  —  Friedrich-Alexander Universität  —  UnivIS  —  Wiki
Creep and Fatigue
Bitte aus technischen Gründen nur drei Artikel pro Bestellung!

2020/2, Y.F. Wang, C.X. Huang, X.T. Fang, H.W. Höppel, M. Göken, Y.T. Zhu, Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient. In: Scripta Materialia 174 (2020), 19-23, 2020, http://dx.doi.org/10.1016/j.scriptamat.2019.08.022
2019/5, C. Löffl, H. Saage, M. Göken, In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading. In: International Journal of Fatigue 124 (2019), 138-148, 2019, http://dx.doi.org/10.1016/j.ijfatigue.2019.02.035
2019/3, C. Schunk, M. Nitschky, H.W. Höppel, M. Göken , Superior mechanical properties of Aluminum–Titanium laminates in terms of local hardness and strength. In: Advanced Engineering Materials 21, (2019), 2019, http://dx.doi.org/10.1002/adem.201800546
2019/23, H. Zhou, C. Huang, X. Sha, L. Xiao, X. Ma, H. W. Höppel, M. Göken, X. Wu, K. Ameyama, X. Han, Y. Zhu, In-situ observation of dislocation dynamics near heterostructured interfaces. In: Materials Research Letters 7 (2019), 376-382, 2019, http://dx.doi.org/10.1080/21663831.2019.1616330
2019/13, F. Glöckel, P.J.Uggowitzer, P.Felfer, S. Pogatscher, H.W. Höppel, Influence of Zn and Sn on the Precipitation Behavior of new Al-Mg-Si Alloys. In: Materials 2019, 12 (2019) ,2547, 2019, http://dx.doi.org/10.3390/ma12162547
2018/5, A. E. Medvedev, R. Lapovok, E. Koch, H.W. Höppel, M. Göken, Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure. In: Materials and Design 146 (2018), 142-151, 2018, http://dx.doi.org/10.1016/j.matdes.2018.03.021
2018/31, J.J. Möller, E. Bitzek, Atomic-scale modeling of elementary processes during the fatigue of metallic materials: from crack initiation to crack-microstructure interactions. In: in: Fatigue of Materials at Very High Numbers of Loading Cycles - Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment Ed. HJ Christ, Springer,(2018), 25-48, 2018
2018/30, J. Bach, H.W. Höppel, M. Göken, Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes: Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment. In: in: Fatigue of Materials at Very High Numbers of Loading Cycles - Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment Ed. HJ Christ, Springer,(2018), 1-23, 2018, http://dx.doi.org/10.1007/978-3-658-24531-3_1
2018/24, F. Gulden, S. Gramstat, A. Stich, H.W. Höppel, U. Tetzlaff, Properties and Limitation of an Oxide Coated Aluminum Brake Rotor. In: SAE Technical Paper 2018-01-1877 (2018), 2018, http://dx.doi.org/10.4271/2018-01-1877
2018/21, C.X. Huang, Y.F. Wang, X.L. Ma, S. Yin, H.W. Höppel, M. Göken, X.L. Wu, H.J. Gao, Y.T. Zhu, Interface affected zone for optimal strength and ductility in heterogeneous laminate. In: Materials Today 21, (2018), 713-719, 2018, http://dx.doi.org/10.1016/j.mattod.2018.03.006
2018/20, F. Kümmel, B. Diepold, A. Prakash, H.W. Höppel, M. Göken, Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers. In: International Journal of Fatigue 116 (2018) 379-387, 2018, http://dx.doi.org/https://doi.org/10.1016/j.ijfatigue.2018.06.043
2018/1, B. Merle, H.W. Höppel, Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement. In: Experimental Mechanics 58(3) (2018), 465-474, 2018, http://dx.doi.org/10.1007/s11340-017-0362-3
2018/13, F. Kümmel, B. Diepold, K.F. Sauer, C. Schunk, A. Prakash, H.W. Höppel, M. Göken, High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding. In: Advanced Engineering Materials, 2018, http://dx.doi.org/10.1002/adem.201800286
2017/35, L.P. Freund, S. Giese, D. Schwimmer, H.W. Hoeppel, S. Neumeier, M. Göken, High temperature properties and fatigue strengtth of novel wroght gamma/gamma' Co-base superalloys. In: Journal of Materials Research 32 (24) (2017), 4475-4482, 2017, http://dx.doi.org/10.1557/jmr.2017.315
2017/34, F.Gulden, A. Stich, S. Gramstat, H.W. Höppel, M. Göken, Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars. In: EuroBreak 2017 (EB2017-MDS-026), 2017
2017/32, H. W. Höppel, P. Goik, C. Krechel M. Göken, Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation. In: Journal of Materials Research (2017), , 2017, http://dx.doi.org/10.1557/jmr.2017.313
2017/30, F. Kümmel, H.W. Höppel, M. Göken, Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys. In: Materials Science and Engineering: A 702 (2017), 406-413, 2017, http://dx.doi.org/10.1016/j.msea.2017.06.105
2017/18, P. Král, J.Dvorak, M. Kvapilová, W. Blum, V. Sklenicka, The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper. In: Materials Letters 188 (2017), 235-238, 2017, http://dx.doi.org/10.1016/j.matlet.2016.11.002
2017/10, F. Kümmel, T.-S. Tegtmeier, H.W. Höppel, M. Göken, Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites. In: IOP Conference Series: Materials Science and Engineering 194 (1) (2017), 1-6, 2017
2016/43, H. Mughrabi, The a-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density. In: Current Opinion in Solid State and Materials Science 20 (2016) 411-420, 2016, http://dx.doi.org/10.1016/j.cossms.2016.07.001
2016/39, P. Altieri-Weimar, W. Yuan, E.S. Annibale, S. SchoemakerS. D. Amberger, M. Göken, H.W. Höppel, Reliability model of LED package regarding the fatigue behavior of gold wires. In: 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE, (2016), 1-6, 2016, http://dx.doi.org/10.1109/EuroSimE.2016.7463326
2016/35, V. Favier, A. Blanche, C. Wang, N. L. Phung, N. Ranc, D. Wagner, C. Bathias, A. Chrysochoos, H. Mughrabi, Very high cycle fatigue for single phase ductile materials: Comparison between ?-iron, copper and ?-brass polycrystals. In: International Journal of Fatigue 93 (2016) 326-338, 2016, http://dx.doi.org/10.1016/j.ijfatigue.2016.05.034
2016/34, S. D. Antolovich, H. Mughrabi, In Memoriam Claude Bathias 1938–2015. In: International Journal of Fatigue 93 (2016) 215, 2016, http://dx.doi.org/10.1016/j.ijfatigue.2016.03.007
2016/33, H. Mughrabi, S. Antolovich, A tribute to Claude Bathias – Highlights of his pioneering work in Gigacycle Fatigue. In: International Journal of Fatigue 93 (2016) 217-223, 2016, http://dx.doi.org/10.1016/j.ijfatigue.2016.04.020
2016/24, J. Bach, J.J. Möller, M. Göken, E. Bitzek, H.W. Höppel, On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels. In: International Journal of Fatigue 93 (2016), 281-291, 2016, http://dx.doi.org/10.1016/j.ijfatigue.2016.04.003
2016/1, C. Zenk, S. Neumeier, N. Engl, S. G. Fries, O. Dolotko, M. Weiser, S. Virtanen, M. Göken, Intermediate Co/Ni-base model superalloys — Thermophysical properties, creep and oxidation. In: Scripta Mater. 112, (2016), 83-86, 2016, http://dx.doi.org/10.1016/j.scriptamat.2015.09.018
2015/9, H.U. Rehman, K. Durst, S. Neumeier, A.B. Parsa, A. Kostka, G. Eggeler, M. Göken,, Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy. In: Mater. Sci. Eng. A 634, (2015), 202-208, 2015, http://dx.doi.org/10.1016/j.msea.2015.03.045
2015/5, H. Mughrabi, Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth.. In: Phil. Trans. A Math. Phys. Eng. Sci. 373, (2015), 2038, 2015, http://dx.doi.org/10.1098/rsta.2014.0132
2015/29, S. Neumeier, L. Freund, M. Göken, Novel wrought gamma/gamma ' cobalt base superalloys with high strength and improved oxidation resistance. In: Scripta Mater. 109, (2015), 104-107, 2015, http://dx.doi.org/10.1016/j.scriptamat.2015.07.030
2015/26, W. Blum, J. Dvorak, P. Kral, P. Eisenlohr, V. Sklenicka, Correct Interpretation of Creep Rates: A Case Study of Cu. In: J. Mater. Sci. Technol. 31, (2015), 1065-1068, 2015, http://dx.doi.org/10.1016/j.jmst.2015.09.012
2015/1, D. Amberger, T. Blickle, H.W. Höppel, M. Göken, Fatigue behavior of calcium containing AZ91 magnesium alloys. In: Materials Testing 57, (2015), 126-130, 2015, http://dx.doi.org/10.3139/120.110694
2015/14, A. Bauer, S. Neumeier, F. Pyczak, M. Göken, Influence of Iridium on the Properties of gamma '-Strengthened Co-Base Superalloys. In: Adv. Eng. Mater. 17, (2015), 748-754, 2015, http://dx.doi.org/10.1002/adem.201400266
2014/6, D. Zahn, E. Bitzek, Shearing in a biomimetic apatite-protein composite. In: PLoS ONE 9, (2014), e93309, 2014, http://dx.doi.org/10.1371/journal.pone.0093309
2014/4, W. Blum, J. Dvorak, P. Kral, P. Eisenlohr, V. Sklenicka, What is ‘‘stationary’’ deformation of pure Cu. In: J. Mater. Sci. 49, (2014), 2987–2997, 2014, http://dx.doi.org/10.1007/s10853-013-7983-4
2014/2, B. Merle, M. Göken, Bulge fatigue testing of freestanding and supported gold films. In: J. Mater. Res. 29, (2014), 267-276, 2014, http://dx.doi.org/10.1557/jmr.2013.373
2014/26, M. Pröbstle, S. Neumeier, D. Hünert, M. Göken, Tensile and creep strength of thermally exposed allvac 718Plus. In: 8th International Symposium on Superalloy 718 and Derivatives, (2014), 349-360, 2014, http://dx.doi.org/10.1002/9781119016854.ch28
2014/24, N.L. Phung, A. Blanche, N. Ranc, V. Favier, A. Chrysochoos, N. Marti, N. Saintier, C. Wang, D. Wagner, C. Bathias, F. Grégori, B. Bacroix, H. Mughrabi, G. Thoquenne, Very high cycle fatigue for single phase ductile materials: microplasticity and energy dissipation. In: Curran Associates Inc. 6, (2014), 5113-5121, 2014
2014/23, N.L. Phung, V. Favier, N. Ranc, F. Valés, H. Mughrabi, Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings. In: Int. J. Fatigue 63, (2014), 68-77, 2014, http://dx.doi.org/10.1016/j.ijfatigue.2014.01.007
2014/22, H. Mughrabi, The importance of sign and magnitude of y/y’ lattice misfit in superalloys – with special reference to the new y’-hardened cobalt-base superalloys. In: Acta Mater. 81, (2014), 21-29, 2014, http://dx.doi.org/10.1016/j.actamat.2014.08.005
2014/1, J. Bach, H.W. Höppel, M. Prell, M. Göken, Crack initiation mechanisms in AA6082 fatigued in the VHCF-regime. In: Int. J. Fatigue 60, (2014), 23-27, 2014, http://dx.doi.org/10.1016/j.ijfatigue.2013.08.018
2014/18, S. Lee, J. Im, Y. Yoo, E. Bitzek, D. Kiener, G. Richter, B. Kim, S.H. Oh, Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM. In: Nat. Commun. 5, (2014), 3033, 2014, http://dx.doi.org/10.1038/ncomms4033
2014/17, W. Fragmer, K. Baumgartner, H. Suppan, M. Hummel, D. Bosch, H.W. Höppel, P.J. Uggowitzer, Using scrap in recycling alloys for structural applications in the automotive industry. In: TMS Light Metals, (2014), 349-353, 2014, http://dx.doi.org/10.1002/9781118888438.ch59
2014/15, C.H. Zenk, S. Neumeier, H.J. Stone, M. Göken, Mechanical properties and lattice misfit of y/y' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system. In: Intermetallics 55, (2014), 28-39, 2014, http://dx.doi.org/10.1016/j.intermet.2014.07.006
2014/13, I. Povstugar, P.P. Choi, S. Neumeier, A. Bauer, C.H. Zenk, M. Göken, D. Raabe, Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys. In: Acta Mater. 78, (2014), 78-85, 2014, http://dx.doi.org/10.1016/j.actamat.2014.06.020
2014/11, M. Fried, C. Krechel, E.E. Affeldt, B. Eckert, S. Kimming, U. Retze, H.W. Höppel, M. Göken, Fatigue crack initiation in nickel-based superalloys studied by microstructure-based FE modeling and scanning electron microscopy. In: MATEC Web of Conferences 14, (2014), 16001, 2014, http://dx.doi.org/10.1051/matecconf/20141416001
2013/8, F. Pyczak, A. Bauer, M. Göken, S. Neumeier, U. Lorenz, M. Oehring, N. Schella, A. Schreyer, A. Stark, F. Symanzik, Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy. In: Mater. Sci. and Eng. A571 (2013) 13-18., 2013
2013/5, H. Mughrabi, Cyclic slip irreversibility and fatigue life: A microstructure-based analysis. In: Acta Mater. 61 (2013) 1197-1203., 2013
2013/4, T. Niendorf, A. Böhner, H.W. Höppel, M. Göken, R.Z. Valiev, H.J. Maier, Comparison of montonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by continuous and conventional equal channel angular pressing. In: Materials and Design 47 (2013), 138-142., 2013
2013/23, H. Mughrabi, Cyclic strain rate effects in fatigued face-centred and body-centred cubic metals. In: Phil. Mag. A 93, (2013), 3821-3834 , 2013
2013/21, M. Kommer, S. Schwub, J. Freudenberger, H.W. Höppel, M. Göken, Cyclic Deformation Behaviour and Damage Mechanisms in CuAgZr Alloys. In: Proceedings of the 7th International Conference on Low Cycle Fatigue, T. Beck , E. Charkaluk E. (eds.), Aachen, DVM, Berlin, (2013), p. 457., 2013
2013/20, H.W. Höppel, T. Hausöl, M. Göken, Fatigue Life, Cyclic Deformation Behaviour and Damage Mechanisms of Ultrafine-Grained AA5754 Aluminum Alloy Produced by Accumulative Roll Bonding. In: Proceedings of the 7th International Conference on Low Cycle Fatigue, T. Beck , E. Charkaluk E. (eds.), Aachen, DVM, Berlin, (2013), pp. 267-272., 2013
2013/19, D. Amberger, T. Blickle, H.W. Höppel, M. Göken, Fatigue Behavior of Calcium Containing AZ91 Magnesium Alloys. In: Proceedings of the 7th International Conference on Low Cycle Fatigue, T. Beck , E. Charkaluk E. (eds.), Aachen, DVM, Berlin, (2013), pp. 75-80., 2013
2013/17, J. Bach, H.W. Höppel, E. Bitzek, M. Göken, Influence of specimen geometry on temperature increase during ultrasonic fatigue testing. In: Ultrasonics 53, (2013), 1412-1416., 2013
2013/14, H. Mughrabi, Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis. In: Int. J. Fatigue 57, (2013), 2-8., 2013
2013/12, M. Rahim, J. Frenzel, M. Frotscher, J. Pfetzing-Micklich, R. Steegmüller, M. Wohl-schlögel, H. Mughrabi, G. Eggeler, Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys. In: Acta Mater. 61 (2013) 3667-3686., 2013
2013/11, H. Mughrabi, Damage mechanisms and fatigue lives: From the low to the very high cycle regime. In: In: Proc. of 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, edited by S.C. Chetal, T. Jayakumar, R. Sandhya, K. Laha and M.D. Mathew, Procedia Engineering 55 (2013) 636-644, 2013
2012/8, D. Amberger, P. Eisenlohr, M. Göken, On the importance of a connected hard-phase skeleton for the creep resistance of Mg alloys. In: Acta Mater. 60 (2012), 2277-2289, 2012
2012/4, J. Schaufler, K. Durst, T. Haas, R. Nolte, H.W. Höppel, M. Göken, The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens. In: J. Fatigue 37 (2012), 1-7, 2012
2012/37, A. Bauer, S. Neumeier, F. Pyczak, M. Göken, Creep Strength and Microstructure of Polycrystalline gamma-prime- Strengthened Cobalt-Base Superalloys. In: Superalloys 2012, TMS, (2012), 695-703, 2012
2012/35, M. Yasir, G. Mori, H. Wieser, A. Reller, H.W. Höppel, Study of the sensitization and different heating cycles on stainless steels used for automotive exhaust components. In: Mater. Corr. 63 (2012), 763-776, 2012
2012/31, P. Eisenlohr, O. Güvenc, D. Amberger, Influence of hard-phase skeleton on creep strength of Mg-alloys - insights from full field deformation simulations. In: 9th Int. Conf. Magnesium Alloys and their Applications, Vancouver (2012), 87-92, 2012
2012/30, A. Böhner, H.W. Höppel, J. May, M. Göken, Influence of the ECAP processing parameters on the cyclic deformation behavior on ultrafine-grained cubic centered metals. In: Adv. Eng. Mater. 14 (2012), 842-847, 2012
2012/14, H. Mughrabi, Damage mechanisms and fatigue lives: From the low to the very high cycle regime. In: Proceedings of the 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), Mamallapuram, January 22-25, (2012), 235-242, 2012
2011/3, M. Korn, R. Lapovok, A. Böhner, H.W. Höppel, H. Mughrabi, Bimodal grainsize distribution in UFG materials produced by SPD – their evolution and effect on the fatigue and monotonic strength properties. In: Kovove Mater. 49 (2011), 1, 2011, http://dx.doi.org/10.4149/km 2011 1 51
2011/38, W. Blum, Y.J. Li, Y. Zhang, J.T. Wang, Deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAP. In: Mater. Sci. and Eng. A 528 (2011), 8621, 2011, http://dx.doi.org/10.1016/j.msea.2011.08.010
2011/34, W. Blum, P. Eisenlohr, Structure evolution and deformation resistance in production and application of ultrafine-grained materials - The concept of steady-state grains. In: Mater. Sci. Forum 683 (2011), 163, 2011, http://dx.doi.org/10.4028/www.scientific.net/MSF.683.163
2011/33, W. Blum, X.H. Zeng, Corrigendum to “A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity” (Acta Materialia (2009) 57 (1966-1974)). In: Acta Mater. 59 (2011), 6205, 2011, http://dx.doi.org/10.1016/j.actamat.2011.05.032
2011/27, J. Bach, H.W. Höppel, M. Prell, M. Göken, Influence of the grain size and precipitations on the fatigue lives and deformation mechanisms in the VHCF-regime. In: Proc. of the 5th Int. Conf. on Very High Cycle Fatigue (VHCF-5), Berlin 2011, edited by C. Berger and H.-J. Christ, Deutscher Verband für Materialforschung und –prüfung e.V. (DVM) (2011), 213, 2011
2011/26, H. Mughrabi, The importance of fatigue crack initiation in ultrahigh-cycle fatigue (UHCF). In: Proc. of the 5th Int. Conf. on Very High Cycle Fatigue (VHCF-5), Berlin 2011, edited by C. Berger and H.-J. Christ, Deutscher Verband für Materialforschung und –prüfung e.V. (DVM) (2011), 53, 2011
2011/22, H.W. Höppel, M. Göken, Fatigue behaviour of nanostructured materials. In: Nanostructured metals and alloys, edited by Sung H. Whang, Woodhead Publishing Limited, Philadelphia, USA, 2011, 507, 2011
2011/1, H.W. Höppel, L. May, M. Prell, M. Göken, Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime. In: I. J. Fat. 33 (2011), 10, 2011, http://dx.doi.org/10.1016/j.ijfatigue.2010.04.013
2011/18, O. Franke, M. Göken, M. Meyers, K. Durst, A. Hodge, Dynamic nanoindentation of articular porcine cartilage. In: "Mater. Sci. Eng. C, 2011, http://dx.doi.org/ 31 (2011), 789"
2011/13, S. Mekala, P. Eisenlohr, W. Blum, Control of dynamic recovery and strength by subgrain boundaries – Insights from stress-change tests on CaF2 single crystals. In: Phil. Mag. 91 (2011), 908, 2011, http://dx.doi.org/10.1080/14786435.2010.535324
2010/7, H.W. Höppel, M. Prell, L. May, M. Göken, Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF-regime. In: Proceedings of FATIGUE 2010, edited by P. Lukáš, Procedia Engineering 2 (2010), 1025-1034, 2010, http://dx.doi.org/10.1016/j.proeng.2010.03.111
2010/6, H. Mughrabi, Fatigue, an everlasting materials problem – still en vogue. In: Proceedings of FATIGUE 2010, edited by P. Lukáš, Procedia Engineering 2 (2010), 3-26, 2010, http://dx.doi.org/10.1016/j.proeng.2010.03.003
2010/4, Y. Cheng, E. Bitzek, D. Weygand, P. Gumbsch, Atomistic simulation of dislocation-void interactions under cyclic loading. In: "Modelling and Simulation in Materials Science and Engineering, 2010, http://dx.doi.org/ 18 (2010), 025006"
2010/3, A. Weidner, D. Amberger, F. Pyczak, B. Schönbauer, S. Stanzl-Tschegg, H. Mughrabi, Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold. In: Int. J. Fatigue 32 (2010), 872-878, 2010, http://dx.doi.org/10.1016/j.ijfatigue.2009.04.004
2010/23, H. Mughrabi, Cyclic deformation and fatigue of different steels. Fundamentals and some examples of applications. In: Proc. of 2nd International Steel Science Seminar, Kyoto, 2009, The Iron and Steel Institute of Japan (2010), 1, 2010
2010/19, H. Mughrabi, H.W. Höppel, Cyclic deformation and fatigue properties of very fine-grained metals and alloys. In: I. J. Fat. 32 (2010), 1413, 2010, http://dx.doi.org/10.1016/j.ijfatigue.2009.10.007
2010/13, D. Amberger, P. Eisenlohr, M. Göken, Influence of microstructure on creep strength of MRI 230D Mg alloy. In: J. Phys.: Conference Series 240 (2010), 012068, 2010, http://dx.doi.org/10.1088/1742-6596/240/1/012068
2009/9, W. Blum, P. Eisenlohr, V. Sklenivcka, Creep of bulk nanostructured materials. In: ”Bulk Nanostructured Materials”, Chapter 22, edited by M.J. Zehetbauer and Y.T. Zhu, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2009, pp. 519-537, 2009
2009/8, H.W. Höppel, H. Mughrabi, A. Vinogradov, Fatigue properties of bulk nanostructured materials. In: “Bulk Nanostructured Materials”, Chapter 22, edited by M.J. Zehetbauer and Y.T. Zhu, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2009, pp. 481-500, 2009
2009/6, L.R. Saitova, H.W. Höppel, M. Göken, I.P. Semenova, R.Z. Valiev, Cyclic deformation behaviour and fatigue lives of ultrafine-grained Ti-6Al-4V ELI alloy for medical use. In: Int. J Fatigue 31 (2009), 322-331, 2009, http://dx.doi.org/10.1016/j.ijfatigue.2008.08.007
2009/5, B. Backes, K. Durst, D. Amberger, M. Göken, Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy. In: Metal. Mater. Trans. A40 (2009), 257-261, 2009, http://dx.doi.org/10.1007/s11661-008-9720-1
2009/3, W. Blum, Role of boundaries in control of deformation rate and strength of crystalline materials. In: Mater. Sci. For. 604-605 (2009), 391-401, 2009, http://dx.doi.org/10.4028/www.scientific.net/MSF.604-605.391
2009/37, D. Amberger, P. Eisenlohr, M. Göken, Influence of the microstructure on creep strength of MRI 230D magnesium alloy. In: Proceedings of the 8th International Conference on Magnesium Alloy and their Applications, Weimar, edited by K.U. Kainer, Wiley-VCH, Weinheim, 2009, pp. 1255-1259, 2009
2009/35, R. Nolte, H.W. Höppel, M. Göken, Großkammer-Rasterelektronenmikroskopie – Neue Dimensionen der Materialforschung und Schadensanalyse. In: Tagung Werkstoffprüfung „Fortschritte der Kennwertermittlung für Forschung und Praxis“, edited by: M. Borsutzki, S. Geisler, Verlag Stahleisen GmbH, Düsseldorf, 2009, pp.195-202, 2009
2009/32, W. Blum, Y. Li, K. Durst, Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures. In: Acta Mater. 57 (2009), 5207-5217, 2009, http://dx.doi.org/10.1016/j.actamat.2009.07.030
2009/29, H. Mughrabi, Cyclic slip irreversibilities and the evolution of fatigue damage. In: Metal. Mater. Trans. B: Process Metallurgy and Materials Process Science 40 (2009), 431-453 and Metal. Mater. Trans. A: Process Metallurgy and Materials Process Science 40 (2009), 1257-1279, 2009, http://dx.doi.org/10.1007/s11661-009-9839-8
2009/25, D. Amberger, P. Eisenlohr, M. Göken, Microstructural evolution during creep of Ca-containing AZ91. In: Mater. Sci. Eng. A 510-511 (2009), 398-402, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.115
2009/24, P. Eisenlohr, W. Blum, K. Milicka, Dislocation glide velocity in creep of Mg alloys derived from dip tests. In: Mater. Sc. Eng. A 510-511 (2009), 393-397, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.120
2009/22, Y. Wang, K.H. Mayer, A. Scholz, C. Berger, H. Chilukuru, K. Durst, W. Blum, Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650°C. In: Mater. Sci. Eng. A 510-511 (2009), 180-184, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.116
2009/21, H. Chilukuru, K. Durst, S. Wadekar, M. Schwienheer, A. Scholz, C. Berger, K.H. Mayer, W. Blum, Coarsening of precipitates and degradation of creep resistance in tempered martensite steels. In: Mater. Sci. Eng. A 510-511 (2009), 81-87, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.088
2009/20, P. Sadrabadi, P. Eisenlohr, G. Wehrhan, J. Stäblein, L. Parthier, W. Blum, Evolution of dislocation structure and deformation resistance in creep exemplified an single crystals of CaF2. In: Mater. Sci. Eng. A 510-511 (2009), 46-50, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.086
2009/1, L.R. Saitova, H.W. Höppel, M. Göken, I.P. Semenova, G.I. Raab, R.Z. Valiev, Fatigue behaviour of ultrafine-grained Ti-6Al-4V ‘ELI’ alloy for medical applications. In: Mater. Sci. Eng. A 503 (2009), 145-147, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.082
2009/19, P. Kumar, M.E. Kassner, W. Blum, P. Eisenlohr, T.G. Langdon, New Observations on high temperature creep at very low stresses. In: Mater. Sci. Eng. A 510-511, (2009), 20-24, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.094
2009/18, W. Blum, P. Eisenlohr, Dislocation mechanics of creep. In: Mater. Sci. Eng. A 510-511 (2009), 7-13, 2009, http://dx.doi.org/10.1016/j.msea.2008.04.110
2009/17, H. Mughrabi, Mechanisms of Fatigue Damage at Very High Numbers of Cycles Below the Classical Fatigue Limit. In: Festschrift of Ruhr-Universität Bochum on the occasion of Award of Honorary Doctoral Degree, Ruhr-Universität Bochum, 2009, pp. 36-56, 2009
2009/15, W. Blum, X. H. Zeng, A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthhening and enhanced strain rate sensitivity. In: Acta Mater. 57 (2009), 1966-1974, 2009, http://dx.doi.org/10.1016/j.actamat.2008.12.041
2009/10, H. Mughrabi, Microstructural aspects of high-temperature deformation of monocrystalline nickel-base superalloys: some open problems. In: Proc. of the Malcom McLean Memorial Symposium, edited by R.Reed and P. Lee, Special Issue of Mater. Sci. Technol. 25 (2009), 191-204, 2009, http://dx.doi.org/10.1179/174328408X361436
2008/8, H. W. Höppel, J. May, M. Göken, Cyclic deformation behaviour and fatigue life of ultrafine-grained metals. In: Proc. of 137th Annual Meeting of TMS, Hael Mughrabi Honorary Symposium, KJ. Hsia, M. Göken, T. Pollock, P. Portella, NR. Moody (eds.), New Orleans, 2008, pp. 149-154, 2008
2008/3, R. Nützel, E.E. Affeldt, M. Göken, Damage Evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy. In: International Journal of Fatigue 30 (2008), 313-317, 2008, http://dx.doi.org/10.1016/j.ijfatigue.2007.01.045
2008/37, S. Neumeier, F. Pyczak, M. Göken, The influence of ruthenium and rhenium on the local properties of the gamma- and gamma?-phase in nickel-base superalloys and their consequences for alloy behaviour. In: Proceedings of the International Symposium on Superalloys 2009, 109-119, 2008
2008/33, A. Weidner, D. Amberger, F. Pyczak, B. Schönbauer, S. Stanzl-Tschegg and H. Mughrabi, Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold. In: Proc. of 17th European Conf. on Fracture (ECF 17), CD: ISBN: 978-80-214-3692-3, 2008, 2008
2008/32, H. Mughrabi, H.W. Höppel, Assessment of fatigue damage in heterogeneous materials by application of a novel compliance technique. In: “Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness”, edited by G.C. Sih, Springer Science + Business Media B.V., 2008, 327-343, 2008
2008/31, J. May, D. Amberger, M. Dinkel, H.W. Höppel, M.Göken, Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium. In: Materials Science and Engineering A, 483-484, 2008, 481-484, 2008, http://dx.doi.org/10.1016/j.msea.2006.12.177
2008/29, R. Nützel, E.E. Affeldt, M. Göken, Influence of a beta-NiAl coating on monocrystalline nickel-base alloys on the thermo-mechanical fatigue life. In: 6th International Conference on Low Cycle Fatigue - LCF 6, Deutscher Verband für Materialforschung und -prüfung, Berlin, 2008, 449-454, 2008
2008/28, H.W. Höppel, J. May, M. Göken, Fatigue behaviour of UFG Al: influence of the ECAP route and the magnesium alloying content. In: Proceedings of the 6th International Conference on Low Cycle Fatigue, Berlin, Germany, 2008, 325-330, 2008
2008/27, L.Saitova, H. W. Höppel, M. Göken, Influence of grain size on fatigue properties of Ti-6Al-4V ELI alloy. In: Proceedings of the 6th International Conference on Low Cycle Fatigue, Berlin, Germany, 2008, 319-324, 2008
2008/25, P. Eisenlohr, P. Sadrabadi, and W. Blum, Quantifying the distributions of dislocation spacings and cell sizes. In: J. Mater. Sci., 43, 2700-2707 (2008), 2008, http://dx.doi.org/10.1007/s10853-008-2467-7
2008/17, H.W. Höppel, J. May M. Göken, Cyclic deformation behaviour and fatigue lives of ultrafine-grained aluminium-magnesium alloys. In: Mat. Sci. Forum 584-586 (2008) 840-845, 2008
2008/15, L.Saitova, H. W. Höppel, M. Göken, I. Semenova, A. Kilmametov, R. Valiev, Cycling of ultrafine-grained Ti-6Al-4V ELI alloy: microstructural changes and enhanced fatigue limit. In: Mater. Sci. Forum 584-586 (2008) 827-832, 2008
2008/13, W. Blum, Mechanisms of creep in steel. In: F. Abe, T.-U. Kern, R. Viswanathan (eds.), Creep resistant steels, 365-402, Woodhead Publishing, Cambridge, 2008, 2008
2008/12, Y.J. Li, X.H. Zeng, W. Blum, On the elevated-temperature deformation behaviour of polycrystalline Cu subjected to predeformation by multiple compression. In: Mater. Sci. Eng. A 483-484 (2008), 547-550, 2008, http://dx.doi.org/10.1016/j.msea.2006.09.133
2007/6, J. May, M. Dinkel, D. Amberger, H. W. Höppel, M. Göken, Mechanical Properties, Dislocation Density and Grain Structure of Ultrafine – Grained Aluminum and Aluminum – Magnesium Alloys. In: Metall. Mater. Trans. A 38, (2007) 1941-1945, 2007, http://dx.doi.org/10.1007/s11661-007-9110-0
2007/24, H. Mughrabi , S. Stanzl-Tschegg, Fatigue Damage Evolution in Ductile Single-Phase Face-Centred Cubic Metals in the UHCF-Regime. In: Proceedings of Fourth International Conference on Very High Cycle Fatigue (VHCF-4), edited by J. E. Allison, J. W. Jones, J. M. Larsen and R. O. Ritchie, TMS (The Minerals, Metals & Materials Society), 2007. pp. 75-82, 2007
2007/23, S. Stanzl-Tschegg, H. Mughrabi, B. Schoenbauer, Life time and cyclic slip of copper in the VHCF regime. In: Int. J. Fatigue 29 (2007) 2050-2059, 2007, http://dx.doi.org/10.1016/j.ijfatigue.2007.03.010
2007/22, J. A. El-Awady, N. M. Ghoniem, and H. Mughrabi, Dislocation modeling of localized plasticity in persistent slip bands. In: Proc. of the 136th TMS Annual Meeting and Exhibition, Materials Processing and Manufacturing Division, Orlando, Florida, Symposium: Mechanics and Materials Modeling and Materials Design Methodologies, in the Honor of Dr. Craig Hartley's 40 years of Contributions to the Field of Mechanics and Materials Science, edited by B. L. Adams and A. Garmestani, 2007, pp. 23-35, 2007
2007/21, L. Saitova, H.-J. Grieß, H.W. Höppel, M. Göken, Oberflächenaufrauung und Ermüdungsverhalten von Aluminium mit unterschiedlichen Korngrößen im VHCF-Bereich. In: Werkstoffprüfung 2007, M. Pohl (ed.), Wiley-VCH, 2007, pp.407-414, 2007
2007/20, H.W. Höppel, Reibermüdung: Einflussgrößen, Schädigungsmechanismen und Designkriterien. In: Werkstoffprüfung 2007, M. Pohl (ed.), Wiley-VCH, 2007, pp. 35-44, 2007
2007/14, W. Blum, Y.J. Li, Flow stress and creep rate of nanocrystalline Ni. In: Scripta Mat. 57, (2007) 429-431, 2007, http://dx.doi.org/10.1016/j.scriptamat.2007.04.041
2007/11, H.W. Höppel, L. Saitova, H.-J. Grieß, M. Göken, Surface roughening and fatigue behaviour of pure aluminium with various grain size in the VHCF regime. In: Proc. of 4th Int. Conf. on Very High Cycle Fatigue, VHCF-4, J.E. Allison, J.W. Jones, J.M. Larsen, R.O. Ritchie (eds.), TMS, Warrendale, USA, 2007, pp. 59-66, 2007
2006/9, H.W. Höppel, F. Neuner, R. Nützel, Fretting fatigue behaviour and damage mechanisms of plain carbon steels. In: CD-ROM of Proceedings of Fatigue 2006, 9th International Fatigue Congress, Atlanta, May 2006, Reference FT 213, Elsevier Ltd., 2006, 2006
2006/8, H.W. Höppel, M. Kautz, H. Mughrabi, Microstructural fatigue mechanisms of ultrafine-grained metals. In: CD-ROM of Proceedings of Fatigue 2006, 9th International Fatigue Congress, Atlanta, May 2006, Reference FT 207, Elsevier Ltd., 2006, 2006
2006/7, H. Mughrabi, Fatigue mechanisms in the ultrahigh cycle regime. In: CD-ROM of Proceedings of Fatigue 2006, 9th International Fatigue Congress, Atlanta, May 2006, Reference FT 193, Elsevier Ltd., 2006, 2006
2006/6, H. Mughrabi, Specific features and mechanisms of fatigue in the ultrahigh-cycle regime. In: Int. J. Fatigue 28(2006),1501-1508, 2006, http://dx.doi.org/10.1016/j.ijfatigue.2005.05.018
2006/5, H. Mughrabi, H.W. Höppel, M. Kautz, Microstructural mechanisms governing the fatigue performance of ultrafine-grained metals and alloys. In: Ultrafine-Grained Metals IV, Y.T. Zhu, T.G. Langdon, Z. Horita, M.J. Zehetbauer, S.L. Semiatin and T.C. Lowe (eds.), TMS, 2006, pp. 47-54, 2006
2006/3, J. May, H. W. Höppel, M. Göken, Strain rate sensitivity of ultrafine grained fcc- and bcc-type metals. In: Proc. of 3rd Int. Conf. on Nanomaterials by Severe plastic Deformation NANOSPD3, Z. Horita (ed.), Trans Tech Publications, Uetikon, Swiss, 2006, and Materials Science Forum 503-504 (2006), 781-786, 2006, http://dx.doi.org/10.4028/www.scientific.net/MSF.503-504.781
2006/24, W. Blum, Y. J. Li, J. Chen, X. H. Zheng, K. Lu, On the Hall-Petch relation between flow stress an grain size. In: Int. J. Mat. Res. 97 (2006), 12, 2006
2006/23, R. Agamennone, W. Blum, C. Gupta, J. K. Chakravartty, Evolution of microstructure and deformation resistance in creep of tempered martensitic 9-12%Cr-2%W-5%Co steels. In: Acta Mater. 54 (2006), 3003-3014, 2006, http://dx.doi.org/10.1016/j.actamat.2006.02.038
2006/1, H. W. Höppel, Mechanical behaviour of ultrafine-grained metals under cyclic and monotonic loads: An overview. In: Proc. of 3rd Int. Conf. on Nanomaterials by Severe Plastic Deformation NANOSPD3, Fukuoka, Japan, 2005, Z. Horita (ed.), Trans Tech Publications, Uetikon, Switzerland, 2006, and Materials Science Forum 503-504 (2006), 259-266, 2006, http://dx.doi.org/10.4028/www.scientific.net/MSF.503-504.259
2006/18, H. Chilukuru, K. Durst, M. Göken, W. Blum, On the roles of M2X and Z-phase in tempered martensitic 9-12% Cr steels. In: Materials for Advanced Power Engineering, Proceedings of the 8th Liege Conference, J. Lecomte-Beckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part III, (2006), 1241-1249, 2006
2006/15, K.W. Schwarz, H. Mughrabi , Interactions and passing stress of two threading dislocations of opposite sign in a confined channel. In: Phil. Mag. Letters 86 (2006), 773-785, 2006, http://dx.doi.org/10.1080/09500830601026467
2006/14, H. Mughrabi, T. Ungár, X-ray diffraction: Close-up on crystal plasticity (News & Views). In: nature materials 51 (2006), 601-602, 2006
2006/12, S. Stanzl-Tschegg, H. Mughrabi H., R. Schuller, Does copper undergo surface roughening during fatigue in the VHCF regime?. In: Fracture of Nano- and Engineering Materials and Structures, Proceedings of 16th European Conference of Fracture (ECF 16), no. 458. E.E. Gdoutos (ed.), Springer, 2006, ISBN-10 1-4020-4971-4, 2006
2006/11, H.W. Höppel, M. Kautz, C. Xu, M. Murashkin, T.G. Langdon, R.Z. Valiev, H. Mughrabi, An overview: Fatigue behaviour of ultrafine-grained metals and alloys. In: Int. J. Fatigue 28 (2006) 1001-1010, 2006, http://dx.doi.org/10.1016/j.ijfatigue.2005.08.014
2006/10, H. Mughrabi, H.W. Höppel, M. Kautz, Microstructural aspects of cyclic deformation and fatigue of ultrafine-grained metals. In: Nanostrucured Materials by High-Pressure Severe Plastic Deformation, Y.T. Zhu and V. Varyukhin (eds.), Springer (2006), 209-216, 2006
2005/9, H. Mughrabi, B. Obst, Misorientations and geometrically necessary dislocations in deformed copper crystals: A microstructural analysis of X-ray rocking curves. In: Z. Metallkd. 96 (2005) 686-695, 2005
2005/7, H. Mughrabi, Implications of non-negligible microstructural variations during steady-state deformation. In: Z. Metallkd. 96 (2005) 546-551, 2005
2005/15, F. Pyczak, B. Devrient, F.C. Neuner, H. Mughrabi, The effect of alloying elements on the magnitude and temperature dependence of the gamma/gamma’ lattice mismatch of some selected rhenium-free and rhenium-containing nickel-base superalloys. In: Acta Materialia 53 (2005), 3879-3891, 2005
2005/14, Y. J. Li, W. Blum, Strain rate sensitivity of Cu after severe plastic deformation by multiple compression. In: phys. Stat. sol (a) 202, (2005), R119-R121, 2005, http://dx.doi.org/10.1002/pssa.200521160
2005/13, "W. Blum, Y.J. Li. In: H. Zeng, 2005, http://dx.doi.org/ P. Zhang
2005/11, F. Pyczak, B. Devrient, F.C. Neuner, H. Mughrabi, The influence of different alloying elements on the development of the gamma/gamma’ microstructure of nickel-base superalloys during high-temperature annealing and deformation. In: Acta Materialia 53 (2005) 3879-3891, 2005, http://dx.doi.org/10.1016/j.actamat.2005.04.041
2005/10, P. Eisenlohr, W. Blum, Bridging steady-state deformation behaviour at low and high temperature by considering dislocation dipole annihilation. In: Mat. Sci Eng. A400-401 (2005) 175-181, 2005, http://dx.doi.org/10.1016/j.msea.2005.01.069
2004/9, H. Mughrabi, From single to collective dislocation glide instabilities: A hierarchy of scales, embracing the Neumann strain bursts. In: Z. Metallkd. 95 (2004), 411-415, 2004
2004/6, K. Durst, O. Franke, H.W. Höppel, Ernst E. Affeldt, M. Göken, Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis-Superlegierungen nach thermomechanischer Ermüdung. In: Prakt. Met. Sonderband 36, M. Pohl (Hrsg.), Werkstoffinformationsgesellschaft mbH, Frankfurt, 2004, 117-122, 2004
2004/4, H.W. Höppel, C. Xu, M. Kautz, N. Barta-Schreiber, T.G. Langdon, H. Mughrabi, Cyclic deformation behaviour and possibilities for enhancing the fatigue properties of ultrafine-grained metals. In: Proc. of the Conf. “Nanomaterials by Severe Plastic Deformation – NANOSPD2”, M. Zehetbauer and R.Z. Valiev (eds.), Wiley-VCH, Weinheim, 2004, pp. 677-683, 2004
2004/3, H. Mughrabi, Zbigniew Stanislaw Basinski’s fundamental contributions to the understanding of metal fatigue. In: Phil. Mag. 84, (2004), 259-268, 2004, http://dx.doi.org/10.1080/14786430310001612166
2004/2, M. Kautz, H.W. Höppel, H. Mughrabi, Fatigue lives and cyclic deformation behaviour of ultrafine-grained metals and alloys. In: DFG-Abschlusskolloquium “Lebensdauervorhersage”, DVM Berlin, 2004, pp. 117-125, 2004
2004/25, W. Blum, Y.J. Li, Influence of grain boundaries on steady-state deformation resistance of ultrafine-grained Cu. In: phys. Stat sol. (a) 201 (2004) 2915-2021, 2004, http://dx.doi.org/10.1002/pssa.200406878
2004/21, H.J. McQueen, W. Blum, Comparative Hot Workability of Al, Al-5Mg and Al-5Mg-0.7Mn Alloys. In: Int. Journ. for Industry Research and Appl., Aluminium 80 (2004) Part I: Mechanical and microstructural behaviours, 1151-1159. Part II: Hot ductility and extrusion, 1263-1270. Part III: Static restoration and rolling schedules, 1347-1355, 2004
2004/19, X.H. Zeng, Y.J. Li, W. Blum, On coble creep in ultrafine-grained Cu. In: phys. Stat. sol. (a) 201, (2004), R114-R117, 2004, http://dx.doi.org/10.1002/pssa.200409072
2004/18, Y.J. Li, W. Blum, F. Breutinger, Does nanocrystalline Cu deform by coble creep near room temperature. In: Mat. Sci. Eng. A 387-389 (2004) 585-589, 2004, http://dx.doi.org/10.1016/j.msea.2003.11.086
2004/17, Y.J. Li, X.H. Zeng, W. Blum, Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu. In: Acta Mat. 52 (2004) 5009-5018, 2004, http://dx.doi.org/10.1016/j.actamat.2004.07.003
2004/14, H.W. Höppel, M. Göken, M. Klein, Large chamber scanning electron microscopes: Challenges and Aspects for Materials Science. In: G.I.T. Imaging & Microscopy 3, 2004, 34-35, 2004
2004/13, H. Mughrabi, H.W. Höppel, M. Kautz, Fatigue and microstructure of ultrafine-grained metals produced by severe deformation. In: Scripta Mat. 51 (2004) 807-812, 2004, http://dx.doi.org/10.1016/j.scriptamat.2004.05.012
2004/12, F. Grube, E.E. Affeldt, H. Mughrabi, On the effect of platinum-modified aluminide coatings on a monocrystalline nickel base superalloy substrate under conditions of thermo-mechanical fatigue (TMF). In: 5th Int. Conf. on Low Cycle Fatigue, LCF, Berlin, P.D. Portella, H. Sehitoglu and K. Hatanaka (eds.), DVM Berlin, 46 (2004), 309-314, 2004
2004/11, F.C. Neuner, R. Nützel, H.W. Höppel, Fretting fatigue of low carbon steels in the high cycle fatigue regime. In: 5th Int. Conf. on Low Cycle Fatigue, LCF5, Berlin, P.D. Portella, H.Sehitoglu and K. Hatanaka (eds.), DVM Berlin, 46, (2004) 379-383, 2004
2004/10, M. Kautz, H.W. Höppel, C. Xu, T.G. Langdon, H. Mughrabi, Fatigue lives and cyclic deformation behaviour of ultrafine-grained materials. In: 5th Int. Conf. on Low Cycle Fatigue, LCF, Berlin, P.D. Portella, H. Sehitoglu and K. Hatanaka (eds.), DVM Berlin, 46, (2004), 113-118, 2004
2003/7, P. Zhang, W. Blum, Precipitation of b-phase and twinning during deformation of Mg-Al alloy AZ91 at 150°C after solution treatment. In: Z. Metallkd. 94 (2003) 716-718, 2003
2003/6, H. Mughrabi, On the dislocation mechanisms of dynamic strain ageing in fatigued plain carbon steels. In: Z. Metallkd. 94 (2003) 471-477, 2003
2003/3, F. Breutinger, Y. Li, J. Zeschky, S.H. Lo, W. Blum, Stress relaxation in Mg-Al-Alloys AZ31 reinforced by ceramic foam. In: Mat. Sci. Forum 419-422 (2003) 811-816, 2003, http://dx.doi.org/10.4028/www.scientific.net/MSF.419-422.811
2003/2, Y. Qin, G. Götz, W. Blum, Subgrain structure during annealing and creep of the cast martensitic Cr-steel G-X12CrMoWVNbN 10-1-1. In: Mat. Sci. Eng. A341 (2003) 211-215, 2003
2003/1, G. Götz, W. Blum, Influence of thermal history on precipitation of hardening phases in tempered martensite 10%Cr-steel X12CrMoWVNbN 10-1-1. In: Mat. Sci. Eng. A348 (2003) 201-207, 2003
2003/16, P. Eisenlohr, M. Winning, W. Blum, Migration of subgrain boundaries under stress in bi- and multi-granular structures. In: phys. stat. sol. (a) 200 (2003) 339-345, 2003, http://dx.doi.org/10.1002/pssa.200306698
2003/15, W. Blum, Y.J. Li, X.H. Zeng, B. von Großmann, C. Haberling, Creep resistance and creep kinetics of Mg-alloys. In: Proc. of 6th Int. Conf. on Magnesium-Alloys and their Applications, K.U. Kainer (ed.), Wiley-VCH, Weinheim, 2003, pp. 62-67, 2003
2003/14, Y. Qin, G. Götz, W. Blum, Z.G. Zhu, Determination of size distribution of precipitates in the cast martensitic steel G-X12CrMoWVNbN 10-1-1 by direct and indirect method. In: J. of Alloys and Compounds 352 (2003) 260-264, 2003, http://dx.doi.org/10.1016/S0925-8388(02)01092-7
2003/12, F. Grube, E.A. Affeldt, H. Mughrabi, Thermomechanical fatigue behaviour of an aluminde-coated monocrystalline Ni-base superalloy. In: Thermomechanical Fatigue Behaviour of Materials: Vol. 4, ASTM STP 1428, M.A. McGaw, S. Kalluri, J. Bressers and S.D. Peteves, (eds.), ASTM International, West Conshohocken, PA, pp. 164-179, 2003
2003/11, F.C. Neuner, U. Tetzlaff, H. Mughrabi, Enhancement of thermomechanical fatigue resistance of a monocrystalline nickel-base superalloy by pre-rafting. In: Thermomechanical Fatigue Behaviour of Materials: Vol. 4, ASTM STP 1428, M.A. McGaw, S. Kalluri, J. Bressers and S.D. Peteves, (eds.), ASTM International, West Conshohocken, PA, pp. 112-126, 2003
2002/8, P. Eisenlohr, W. Blum, M. De Sanctis, L. Lazzeri, Tertiary creep in a precipitation hardened Al-alloy due to dynamic transformation of precipitates. In: Proc. of a Symposium held at the 2002 TMS Annual Meeting, Seattle, Washington, Creep Deformation: Fundamentals & Applications, R.S. Mishra, J.C. Earthman and S.V. Raj (eds.), TMS, Warrendale, USA, 2002, pp. 279-288, 2002
2002/7, W. Blum, P. Eisenlohr, From power laws to constitutive relations – creep as a special case of crystal plasticity. In: Proc. of a Symposium held at the 2002 TMS Annual Meeting, Seattle, Washington, Creep Deformation: Fundamentals & Applications, R.S. Mishra, J.C. Earthman and S.V. Raj (eds.), TMS, Warrendale, USA, 2002, pp. 21-30, 2002
2002/6, H. Mughrabi, Fatigue crack initiation mechanisms and fatigue life in high-cycle and in ultrahigh-cycle fatigueProc. of a Symposium held at the 2002 TMS Annual Meeting, Seattle, Washington, USA, Fatigue – David. L. Davidson Symposium, K.S. Chan, P.K. Liaw, R.S. Bellows, T.C. Zogas and W.O. Soboyejo (eds.), TMS, Warrendale, USA, pp. 3-15. In: , 2002
2002/5, R. Sedlácek, W. Blum, J. Kratochvíl, S. Forest, Subgrain formation during deformation: Physical origin and consequences. In: Mater. Trans. 33A (2002) 319-327, 2002
2002/4, W. Blum, P. Eisenlohr, F. Breutinger, Understanding creep – a review. In: Mater. Trans 33A (2002) 291-303, 2002
2002/33, H. Mughrabi, T. Ungar, Long-Range internal stresses in deformed single-phase materials: The composite Model and its consequences. In: Dislocations in Solids (ed. F.R.N. Nabarro and M.S. Duesbery), 2002, 2002
2002/28, H.-Z. Ding, H. Mughrabi and H.W. Höppel, A low-cycle fatigue life predication model of ultrafine-grained metals. In: Fatigue Fract. Engng. Mater. Struct. 25 (2002) 975-984., 2002
2002/27, H. Mughrabi, On “multi-stage” fatigue life diagrams and the relevant life-controlling mechanisms in ultrahigh-cycle fatigue. In: Fatigue Fract. Engng. Mater. Struct. 25 (2002) 755-764, 2002
2002/26, R. Sedlacek and W. Blum, Microstructure-based constitutive law of plastic deformation. In: Comp. Mater. Sci. 25 (2002) 200-206., 2002
2002/25, A. Borbély, H. Mughrabi, G. Eisenmeier and H.W. Höppel, A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation. In: Int. J. Frac. 115 (2002) 227-232, 2002
2002/22, H. Biermann, A. Vinogradov and O. Hartmann , Fatigue damage evolution in a particular-reinforced metal matrix composite determined by acoustic emission and compliance method. In: Z. Metallkd. 93 (2002) 719-723, 2002
2002/21, W. Blum and F. Breutinger , New method of determining stress relaxation behaviour in creep machines by controlled unloading. In: Z. Metallkd. 93 (2002) 649-653, 2002
2002/20, H.W. Höppel and R.Z. Valiev , On the possibilities to enhance the fatigue properties of ultrafine-grained metals. In: Z. Metallkd. 93 (2002) 641-648, 2002
2002/17, H.-Z. Ding, O. Hartmann, H. Biermann, H. Mughrabi, Modelling low-cycle fatigue life of particulate-reinforced metal-matrix composites. In: Mat. Sci. Eng. A 333 (2002) 295-305, 2002, http://dx.doi.org/10.1016/S0921-5093(01)01854-8
2002/16, G. Eisenmeier, H.W. Höppel, H.-Z. Ding, H. Mughrabi, Ermüdungslebensdauer der Magnesiumlegierung AZ91: Experiment und Modellierung. In: Mat.-wiss. u. Werkstofftechn. 33 (2002) 238-243, 2002
2002/15, O. Hartmann, M. Kemnitzer, H. Biermann, Influence of reinforcement morphology and matrix strength of metal-matrix composite on the cyclic deformation and fatigue behaviour. In: Int. J. Fat. 24 (2002) 215-221, 2002
2002/14, A. Vinogradov, H. Biermann, O. Hartmann, Acoustic emmision monitoring of damage evolution during fatigue of metal matrix composites. In: Proc. of 8th Int. Fatigue Congress, Fatigue 2002, A. Blom (ed.), vol. 3, EMAS, West Midlands, U.K., 2002, pp. 1939-1948, 2002
2002/13, H.W. Höppel, G. Eisenmeier, B. Holzwarth, H. Mughrabi, Cyclic deformation and fatigue behaviour of the magnesium alloy AZ91: temperature effects and two-step fatigue tests. In: Proc. of 8th Int. Fatigue Congress, FATIGUE 2002, A. Blom (ed.), vol. 3, EMAS Ltd., West Midlands, UK, 2002, pp. 1633-1640, 2002
2002/12, H.W. Höppel, Z.M. Zhou, M. Kautz, H. Mughrabi, R.Z. Valiev, Cyclic deformation behaviour of ultrafine-grained copper produced by equal channel angular pressing. In: Proc. of 8th Int. Fatigue Congress, FATIGUE 2002, A. Blom (ed.), vol. 3, EMAS Ltd., West Midlands, UK, 2002, pp. 1617-1624, 2002
2002/11, H. Mughrabi, Microstructural aspects of metal fatigue resistance. In: Proc. of 8th Int. Fatigue Congress, FATIGUE 2002, A. Blom (ed.), vol. 2, EMAS Ltd., West Midlands, UK, 2002, pp. 971-982, 2002
2002/10, H.W. Höppel, Z.M. Zhou, H. Mughrabi, R.Z. Valiev, Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafine-grained copper. In: Phil. Mag. A 82 (2002) 1781-1794, 2002, http://dx.doi.org/10.1080/01418610210131399